Extender RE200 not showing clients

Extender RE200 not showing clients

Extender RE200 not showing clients
Extender RE200 not showing clients
2024-10-04 10:30:20 - last edited 2024-11-14 08:42:41
Model: RE200  
Hardware Version: V5
Firmware Version: 1

I've had an RE200 extender for a month now and every time I check, there are no clients showing, although my laptop is right next to it - with poor connectivity. Ideas?

  0      
  0      
#1
Options
1 Accepted Solution
Re:Extender RE200 not showing clients-Solution
2024-10-09 09:39:09 - last edited 2024-11-14 08:42:41

  @Strommy 

Hi,

 

Does the extended Wi-Fi have the same name as the main Wi-Fi? Please ensure that the device is connected directly to the RE and not to the main router's Wi-Fi.

Besides, you can also try the following troubleshooting steps:

1. Reboot the device and the extender to have a check.

2. Check if the firmware is the latest or not.

3. Confirm if the device has a static IP. If yes, change it to obtain the IP address automatically.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Extender RE200 not showing clients-Solution
2024-10-09 09:39:09 - last edited 2024-11-14 08:42:41

  @Strommy 

Hi,

 

Does the extended Wi-Fi have the same name as the main Wi-Fi? Please ensure that the device is connected directly to the RE and not to the main router's Wi-Fi.

Besides, you can also try the following troubleshooting steps:

1. Reboot the device and the extender to have a check.

2. Check if the firmware is the latest or not.

3. Confirm if the device has a static IP. If yes, change it to obtain the IP address automatically.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
Recommended Solution
  0  
  0  
#2
Options