Business Community > Switches > Adoption/Provisioning-Loop TL-SG2428P v1.0
< Switches

Adoption/Provisioning-Loop TL-SG2428P v1.0

Adoption/Provisioning-Loop TL-SG2428P v1.0

Adoption/Provisioning-Loop TL-SG2428P v1.0
Adoption/Provisioning-Loop TL-SG2428P v1.0
неделю назад - last edited Friday
Tags: #Configuration #Firmware Update
Model: TL-SG2428P  
Hardware Version: V1
Firmware Version: 1.1.12 Build 20240920 Rel.36048

Hallo,

als Neuling hier bitte ich direkt um Entschuldigung, falls ich zum Thema passende Threads bisher nicht gefunden habe.

 

Ich habe bei mir nun seit fast vier Jahren einen TL-SG2428P im Einsatz. Seit dem letzten Firmware-Update und dem folgenden Reboot hängt der Switch allerdings in einer Adoptions/Provisionierungs-Schleife fest. In der Übersicht meines OC-200 wechselt der Status seitdem ununterbrochen von Adopt -> Provosioning ->. Adopt -> Provisioning usw.

Ich habe den Switch auf dem Controller bereits entfernt, dann einen Reset durchgeführt und die Adoption neu gestartet, leider kein Erfolg, gleiches Ergebnis. Gibt es hierzu eine Lösung? Nach dem Reset ist der Switch zumindest über die eigene Web-Oberfläche ansprechbar.

 

Ich freue mich über jegliche Anregungen.

 

Danke im Voraus.

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Adoption/Provisioning-Loop TL-SG2428P v1.0-Solution
Thursday - last edited Friday

Hallo @Clive_A, 


thanks again for your support.

 

After a few tests, the decisive hint came from one of your German support colleagues. He recommended that I downgrade the switch firmware.
Instead, I first updated the OC-200 firmware to the latest version. The switch could then be integrated again and the network was up and running again.

 

Many thanks for your efforts and support.

 

Kind regards

Recommended Solution
  1  
  1  
#5
Options
4 Reply
Re:Adoption/Provisioning-Loop TL-SG2428P v1.0
неделю назад - last edited неделю назад

Hi @Marc-214 

Thanks for posting in our business forum.

Where did you get TL-SG2428P V1 1.1.12?

I don't see it available on the global site.

 

Also, the whole Internet cannot find 1.1.12.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  0  
  0  
#2
Options
Re:Adoption/Provisioning-Loop TL-SG2428P v1.0
Wednesday - last edited Wednesday

 

Hi @Clive_A ,


Thanks for your quick reply. 
The firmware upgrade was offered to me on the interface of my OC-200. Assuming that only correct and authorised upgrades are offered to me on this interface, I confirmed the upgrade. Since then I have been experiencing the problem described.

 

  0  
  0  
#3
Options
Re:Adoption/Provisioning-Loop TL-SG2428P v1.0
Thursday

Hi @Marc-214 

Thanks for posting in our business forum.

Marc-214 wrote

 

Hi @Clive_A ,


Thanks for your quick reply. 
The firmware upgrade was offered to me on the interface of my OC-200. Assuming that only correct and authorised upgrades are offered to me on this interface, I confirmed the upgrade. Since then I have been experiencing the problem described.

 

 

 

What's the controller version?

Please take a look at the controller page where recently an official version was removed.

If you are on the pulled off version, consider downgrading the controller to avoid an issue on the troubled version.

 

Even after the reset, you try to adopt it back to the controller, the issue persists?

Can you show a diagram of your network with IP marked out?

 

 

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
  1  
  1  
#4
Options
Re:Adoption/Provisioning-Loop TL-SG2428P v1.0-Solution
Thursday - last edited Friday

Hallo @Clive_A, 


thanks again for your support.

 

After a few tests, the decisive hint came from one of your German support colleagues. He recommended that I downgrade the switch firmware.
Instead, I first updated the OC-200 firmware to the latest version. The switch could then be integrated again and the network was up and running again.

 

Many thanks for your efforts and support.

 

Kind regards

Recommended Solution
  1  
  1  
#5
Options

Information

Helpful: 0

Views: 87

Replies: 4

Tags

Configuration Firmware Update
Related Articles
Adoption loop with TL-SG2428P
389 0
unstable TL-SG2428P v1.0
642 0
Omada adoption of TL-SG2428P Switch completely broken, wreaks havoc
1147 0
TL-SG2428P v1.0 firmware bug?
1611 0
Model: TL-SG2428P v1.0 firmware upgrade to 1.1.2
897 0
Omada adoption of TL-SG2428P Switch completely broken, wreaks havoc
309 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.