RE700X setup - I have 2 questions

RE700X setup - I have 2 questions

RE700X setup - I have 2 questions
RE700X setup - I have 2 questions
Sunday - last edited Sunday
Model: RE700X  
Hardware Version: V1
Firmware Version:

 I have 2 questions in setting up my RE700X as an access point. 

 

1) Should the DHCP server in the RE700X be set Auto, On, or Off ? I set it to off thinking my AX55 Router will now make all the choices, but not sure if that is correct.

 

2) Why would Network Settings in the RE700X be set to Auto, instead of  a fixed IP ?

  0      
  0      
#1
Options
1 Reply
Re:RE700X setup - I have 2 questions
Tuesday

  @CoastalJack 

Hi,

 

After you set it up as an access point, the DHCP server would automatically off. The main router will works as the DHCP server in your network. You can also change it to off in this case.

 

When it works as the access point, it will automatically get an IP address from your main router. If you need, you can also manually set up a fixed IP for the range extender. Please make sure it is within the main router's IP pool.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.
  0  
  0  
#2
Options