Very Slow M9 Plus Whole How Network

RishiDS

Thursday - last edited Thursday

Posts: 6

Helpful: 2

Solutions: 0

Stories: 0

Registered: 2021-05-27

Very Slow M9 Plus Whole How Network

Thursday - last edited Thursday

Model: Deco M9 Plus

Hardware Version: V2

Firmware Version: 1.6.4 Build 20240718 Rel. 76925

I have a total of 5 Deco 9 Plus to form a whole whole wifi. Previously i had a slow 60Mb/sec Sky connection but recently changed to a 1Gb/s internet.

This is when i discovered how slow my Whole Home Deco system is. If i am sitting right next to the Main Deco i get about 700Mb/s which is very good. As soon as i am connected to any other Deco my speed is down to about 60 to 100Mb/s.

I have tried everything in the app to optimize this but the one thing i cannot do is to create an Ethernet back haul. Are the Decos supposed to be so poor on a wifi back haul?

As the Deco App is quite poor and does not show you real time stats like Signal to Noise Ratio between Decos you have no idea if placing a Deco in another area has an effect. Just seeing the little signals bars really means nothing. Anybody know of any way to get proper real time stats from the Decos?

1 Reply

Sunshine

Friday

Posts: 7351

Helpful: 1188

Solutions: 805

Stories: 0

Registered: 2018-12-17

Re:Very Slow M9 Plus Whole How Network

Friday

@RishiDS

Hi,

The signal bars on the Deco APP shows the signal strength between the satellite Deco and the main Deco.

If the signal strength is weak, the speed of the satellite Deco can also be affected. If you find it only has one or two bars, you can check if there are any household appliances or metal products near the Deco, place the Deco in an open position or move it closer to the main Deco.

And please power off the satellite deco units, stand at its place and connect to the main Deco, to test the speed you can get from the main one at this certain place, and then compare it with the speed you get from the satellite one.

Nice to Meet You in Our TP-Link Community. Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode. If you found the post or response helpful, please click Helpful. If an answer solves your problem, click "Recommended Solution" so that others can benefit from it.

Very Slow M9 Plus Whole How Network

Very Slow M9 Plus Whole How Network

Information

Voters 0

Tags