Home

Forums

Stories

Knowledge Base

Home Network Community > Deco > Do I have to move the M4 when moving the modem ?

< Deco

Do I have to move the M4 when moving the modem ?

Do I have to move the M4 when moving the modem ?

Do I have to move the M4 when moving the modem ?

a week ago

Posts: 6

Helpful: 0

Solutions: 0

Stories: 0

Registered: 2021-06-22

Do I have to move the M4 when moving the modem ?

a week ago

Model: Deco M4

Hardware Version: V2

Firmware Version:

I have a DECO Mesh with 3 M4s (D1, D2, D3). D2 is ethernet wired to my modem, and D1 and D3 connect to D2 wirelessly. I call D2 the master. I need to move my modem to the D1 area. Can I just unplug D2 and wire-connected D1 without doing any reconfiguration (i.e. D1 becomes the master and D2 and D3 will wirelessly connect to D1 automatically?) If reconfiguration is needed, it is easier for me to move the modem and D2 together since D1 and d3 are wireless and just need to be unplugged from the wall socket.

0

0

#1

1 Reply

a week ago

Posts: 1870

Helpful: 132

Solutions: 268

Stories: 0

Registered: 2022-05-09

Re:Do I have to move the M4 when moving the modem ?

a week ago

Hi, thanks for posting question here.

You may refer to this guide to check how to replace the main Deco with another Deco.

For your situation, it seems much easier to move modem and Deco D2 to D1 area, then move D1 to D2 area.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.

0

0

#2