Business Community > Routers > Changing Site Network
< Routers

Changing Site Network

Changing Site Network

Changing Site Network
Changing Site Network
a week ago - last edited a week ago
Model: ER7212PC  
Hardware Version: V1
Firmware Version:

Hi All,

     I have successfully installed an ER7212PC with 2 EAP613. Now I need to change the internal LAN address from 192.168.1.0 to 192.168.88.0

 

     What is the best way to perform this network change?

 

 

Kind regards

  0      
 
  0      
 
#1
Options
2 Accepted Solutions
Re:Changing Site Network-Solution
a week ago - last edited a week ago

  @Luigi888 

 

 

just change the ip

 

Recommended Solution
  1  
  1  
#2
Options
Re:Changing Site Network-Solution
a week ago - last edited a week ago

Hi @Luigi888 

Thanks for posting in our business forum.

There is no best way to do it. As MR.S stated, all you need to do is to change the LAN network IP to a new one.

 

If the adopted devices do not work well, you may restart them so as to get a new DHCP IP address. They'll work afterward.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options
2 Reply
Re:Changing Site Network-Solution
a week ago - last edited a week ago

  @Luigi888 

 

 

just change the ip

 

Recommended Solution
  1  
  1  
#2
Options
Re:Changing Site Network-Solution
a week ago - last edited a week ago

Hi @Luigi888 

Thanks for posting in our business forum.

There is no best way to do it. As MR.S stated, all you need to do is to change the LAN network IP to a new one.

 

If the adopted devices do not work well, you may restart them so as to get a new DHCP IP address. They'll work afterward.

Best Regards! If you are new to the forum, please read: Howto - A Guide to Use Forum Effectively. Read Before You Post. Look for a model? Search your model NOW Official and Beta firmware. NEW features! Subscribe for the latest update! ☛Download Beta Here☚ ☛ ★ Configuration Guide ★ ☚ ☛ ★ Knowledge Base ★ ☚ ☛ ★ Troubleshooting ★ ☚ ● Be kind and nice. ● Stay on the topic. ● Post details. ● Search first. ● Please don't take it for granted. ● No email confidentiality should be violated. ● S/N, MAC, and your true public IP should be mosaiced.
Recommended Solution
  1  
  1  
#3
Options

Information

Helpful: 0

Views: 71

Replies: 2

Related Articles
ER7212PC - Can it be configured to use both a client to site VPN and a site to site VPN
197 0
How to connect two ER7212PC togther with site to site VPN
298 1
Migrate 'Site' from Controller on ER7212PC to OC300
282 0
Site to Site to Site
920 0
 Migration of oc200 site to ER7212PC
2762 0
ER605 site-to-site and client-to-site
369 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.