ER7206 v2.0 Login to Wix Website Builder produces 403 Forbidden Error
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
When attempting to login to wix (website builder) from any machine connected to this router it produces a 403 Forbidden message, If I disconnect from the router and connect any device straight to the modem I am able to login to this webpage with no issues.
Anyone have any ideas?
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @Brisket
Thanks for posting in our business forum.
The description is not clear.
Do you have port forwarding?
Diagram with the IP specified is required.
Simply based on what you described, this does not look like an issue caused by the router.
- Copy Link
- Report Inappropriate Content
@Clive_A
No Port forwarding
No Special Firewall Settings
The setup is as follows:
Spectrum Modem Connected to WAN2 on ER7206 v2.0
EAP610(US) v3.0 Connected to LAN 4
Netgear Unmanaged 8 Port Gigabit Switch connected to LAN 5
OC200 Connected to LAN 6 (Powered Externally)
Internal IP Structure:
WAN2 Assigned as WAN using DHCP from Spectrum Modem
LAN = 192.168.0.1 / 24
No Different VLANS
Every other website navigates normally. when attempting to login to wix every subpage produces a 403 Forbidden message.
This occurs on EVERY machine connected to the network routed by the ER7206 v2.0 regardless of connection type (wired or wireless)
If I disconnect ANY of the PC's that this occurs on and connect them DIRECTLY to the Spectrum Modem, they are able to navigate to the wix login site normally.
- Copy Link
- Report Inappropriate Content
Hi @Brisket
Thanks for posting in our business forum.
Brisket wrote
@Clive_A
No Port forwardingNo Special Firewall Settings
The setup is as follows:
Spectrum Modem Connected to WAN2 on ER7206 v2.0
EAP610(US) v3.0 Connected to LAN 4
Netgear Unmanaged 8 Port Gigabit Switch connected to LAN 5
OC200 Connected to LAN 6 (Powered Externally)
Internal IP Structure:WAN2 Assigned as WAN using DHCP from Spectrum Modem
LAN = 192.168.0.1 / 24
No Different VLANS
Every other website navigates normally. when attempting to login to wix every subpage produces a 403 Forbidden message.
This occurs on EVERY machine connected to the network routed by the ER7206 v2.0 regardless of connection type (wired or wireless)
If I disconnect ANY of the PC's that this occurs on and connect them DIRECTLY to the Spectrum Modem, they are able to navigate to the wix login site normally.
What is this Wix web builder?
A web service resides in the LAN?
It is still unclear about how it connects. I asked for a diagram to show where this web service is.
Anything else you set on the router? Reset the router with the default config, will it work?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 390
Replies: 3
Voters 0
No one has voted for it yet.