WDR4300 causing modem upstream light to flash
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WDR4300 causing modem upstream light to flash
Region : Canada
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.33 Build 130617 Rel.46239n
ISP : Teksavvy
Cable Internet with Teksavvy has suddenly started slowing down to about half speed for upoads, and the US light is flashing on the modem (Thomson). Their tech support suggested removing the router and sure enough the problem stopped. Now after a day-and-a-half without the router in the system I just set up the router once more and the problem is back. It seems the router is indeed the culprit.
Are there any tests I should perform before trying to send this thing back to TP-Link under warranty? It's about 2-3 months old.
Edit: I forgot to mention that I've already tried a factory reset
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.33 Build 130617 Rel.46239n
ISP : Teksavvy
Cable Internet with Teksavvy has suddenly started slowing down to about half speed for upoads, and the US light is flashing on the modem (Thomson). Their tech support suggested removing the router and sure enough the problem stopped. Now after a day-and-a-half without the router in the system I just set up the router once more and the problem is back. It seems the router is indeed the culprit.
Are there any tests I should perform before trying to send this thing back to TP-Link under warranty? It's about 2-3 months old.
Edit: I forgot to mention that I've already tried a factory reset