Business Community > Wireless > Essentials 1.20 and Heartbeats being missed
< Wireless

Essentials 1.20 and Heartbeats being missed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Essentials 1.20 and Heartbeats being missed

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Essentials 1.20 and Heartbeats being missed
Essentials 1.20 and Heartbeats being missed
2024-12-31 13:35:41 - last edited 2025-01-02 07:24:24
Model: EAP225-Outdoor  
Hardware Version: V1
Firmware Version: 5.1.1

Opening up Essentials 1.20 this morning the FIRST thing I noticed was my 2-AP's displaying "Heartbeat Missed" messages...   about a minute late, with the same Essentials page open(Devices), the message will say "Connected"....each and every time I click away from that page the "Hearbeat Missed" messages appear, until I stay on Devises page again.    Anyone else know of an issue, or have experienced this issue?

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Essentials 1.20 and Heartbeats being missed-Solution
2025-01-02 07:24:19 - last edited 2025-01-02 07:24:24

Hi  @ChrisK619 

 

The Device page of Omada SDN Controller will display all TP-Link SDN devices discovered by the controller and their general information. 


Explanation of HEARTBEAT MISSED: It's a transition status between Connected and Disconnected. Once connected to the controller, the device will send inform packets to the controller in a regular interval to maintain the connection. If the controller does not receive its inform packets in 30 seconds, the device will turn into the Heartbeat Missed status. For a heartbeat-missed device, if the controller receives an inform packet from the device in 5 minutes, its status will become Connected again; otherwise, its status will become Disconnected.

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#2
Options
1 Reply
Re:Essentials 1.20 and Heartbeats being missed-Solution
2025-01-02 07:24:19 - last edited 2025-01-02 07:24:24

Hi  @ChrisK619 

 

The Device page of Omada SDN Controller will display all TP-Link SDN devices discovered by the controller and their general information. 


Explanation of HEARTBEAT MISSED: It's a transition status between Connected and Disconnected. Once connected to the controller, the device will send inform packets to the controller in a regular interval to maintain the connection. If the controller does not receive its inform packets in 30 seconds, the device will turn into the Heartbeat Missed status. For a heartbeat-missed device, if the controller receives an inform packet from the device in 5 minutes, its status will become Connected again; otherwise, its status will become Disconnected.

 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#2
Options

Information

Helpful: 0

Views: 563

Replies: 1

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.