Home Network Community > Deco > Help connecting a HB810 Aginet to a Decco Mesh
< Deco

Help connecting a HB810 Aginet to a Decco Mesh

Help connecting a HB810 Aginet to a Decco Mesh

Help connecting a HB810 Aginet to a Decco Mesh
Help connecting a HB810 Aginet to a Decco Mesh
2025-01-24 20:46:39 - last edited 2025-02-20 10:35:30

I have just got hyperfibre installed with the new modem and I am trying to connect two Be65 units to it as the signal is a bit week outside and downstairs. However the supplied app does not recognise the units as not Aginet and the decco app does not recognise the router. 

Any ideas how to get around this - at the moment I have just plugged one in used that to make a second network for downstairs but not ideal. 

  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:Help connecting a HB810 Aginet to a Decco Mesh-Solution
2025-02-05 08:11:42 - last edited 2025-02-20 10:35:30

  @RachaelA   @ABSID   

 

Hi, welcome to our community.

HB810 is customized model by some ISPs only, which can only be configured and managed via Aginet APP.

But, Deco devices can only be configured and managed by Deco app.

Thank you and best regards.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#3
Options
5 Reply
Re:Help connecting a HB810 Aginet to a Decco Mesh
2025-01-25 20:42:48

  @RachaelA I have same issue. Unable to add in deco app.

  0  
  0  
#2
Options
Re:Help connecting a HB810 Aginet to a Decco Mesh-Solution
2025-02-05 08:11:42 - last edited 2025-02-20 10:35:30

  @RachaelA   @ABSID   

 

Hi, welcome to our community.

HB810 is customized model by some ISPs only, which can only be configured and managed via Aginet APP.

But, Deco devices can only be configured and managed by Deco app.

Thank you and best regards.

Check Out the Latest Posts: Archer GE550 - BE9300 Tri-Band Wi-Fi 7 Gaming Router EasyMesh Is Available When Wi-Fi Routers Work in AP Mode as A Controller. Archer BE550 New Software Enhances System Stability and Optimizes MLO Network Stability. TL-WA3001 Supports EasyMesh, Speed Limit, Guest Network in AP Mode and/or Multi-SSID Mode.
Recommended Solution
  0  
  0  
#3
Options
Re:Help connecting a HB810 Aginet to a Decco Mesh
2025-02-10 01:55:56
I spent a bit of time on this with TP Link support and can confirm that they are incompatible. It's a good enough reason to stick with Ubiquiti in my case.
  2  
  2  
#4
Options
Re:Help connecting a HB810 Aginet to a Decco Mesh
2025-07-09 03:01:32
@RachaelA @ABSID @Japumpy The HB810 uses EasyMesh. The Deco BE65 by default uses Deco Mesh. The two are different mesh technologies & don't interoperate. There is some work TP-Link has shared about some (not all) versions of the Deco X50 and X55 models now supporting (maybe only in betaware?) both Deco Mesh and EasyMesh on the one device; https://community.tp-link.com/en/home/forum/topic/796244 If the Deco BE65's get a future update to also support EasyMesh, then you will be able to add them to the HB810's network via the Aginet APP (as the HB810 is your Hyberfibre (NZ?) gateway). @MArvin_S - any plans for such a firmware update on the Deco BE65's?
  0  
  0  
#5
Options
Re:Help connecting a HB810 Aginet to a Decco Mesh
2025-07-28 20:07:50

Is there any way I can connect my new Deco mesh to my current Aginet Wi-Fi and extend the signal? Any guide, please?

  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1732

Replies: 5

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.