Business Community > Wireless > EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14
< Wireless

EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14
EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14
2025-02-09 20:26:26
Model: EAP772  
Hardware Version: V1
Firmware Version: 1.0.14
After installing firmware 1.0.14 on my EAP772 V1, the data throughput in the 6 GHz band dropped by around 70% compared to an Intel AX210. With 1.0.13 around 1000 Mbit, with 1.0.14 only around 300 Mbit. Disappointing. The problem does not occur on my Intel BE200. Even after a rollback to 1.0.13, performance remains poor in the 6 GHz band and AX210. The connection is also no longer as stable as before. I've been trying different driver versions for a while now, but nothing helps. Driver version 23.110.0.5 is currently installed on both cards. What could that be about?
  0      
 
  0      
 
#1
Options
3 Reply
Re:EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14
2025-02-10 08:27:15

  @Stagediver 

 

Please confirm if my understanding is correct:

 

EAP772 1.0.14 + AX210 -->  ~300 Mbit

EAP772 1.0.14 + BE200  --> ~1000 Mbit

EAP772 1.0.13 + AX210 --> ~1000 Mbit, but the connection is unstable

 

 

EAP772 1.0.13 + BE200 --> what speed will you get on 6Ghz?

 

Is the performance good on 2.4G and 5G?

 

Please also give us the link for the two mentioned models, AX210 and BE200.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#2
Options
Re:EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14
2025-02-10 16:12:19

  @Vincent-TP 

 

EAP772 1.0.14 + AX210 -->  ~300 Mbit

EAP772 1.0.14 + BE200  --> ~1000 Mbit

 

Yes, iperf3 results. 

 

EAP772 1.0.13 + AX210 --> ~1000 Mbit, but the connection is unstable

 

The connection is ~300 MBit in 6 Ghz, even after downgrading to 1.013

 

Is the performance good on 2.4G and 5G?

 

2,4 Ghz not checked. 5 Ghz is 650 Mbit but unstable with AX210

 

The Intel Links are blocked here. "Content or title contains illegal external links."

Intel AX210 and Intel BE200 - standard Laptop cards. 

  0  
  0  
#3
Options
Re:EAP772 V1 bad 6 Ghz Performance vs AX210 with Firmware 1.0.14
2025-02-11 02:14:14

Hi  @Stagediver 

 

Did you test on different 6G channels?

Was there any difference?

If forget the EAP772 and readopt it, does it help?

 

To better assist you, I've created a support ticket via your registered email address, and escalated it to our support engineer to look into the issue. The ticket ID is TKID, please check your email box and ensure the support email is well received. Thanks!
Once the issue is addressed or resolved, welcome to update this topic thread with your solution to help others who may encounter the same issue as you did.
Many thanks for your great cooperation and patience!

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 420

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.