Possible problem with ruter 1043nd v2
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Possible problem with ruter 1043nd v2
Region : Argentina
Model : TL-WR1043ND
Hardware Version : V2
Firmware Version : TL-WR1043ND_V2_130925
ISP : Iskon---Croatian ISP
Hello to all.
My name is Zlatko. I have problem with connecting TPlink accesspoint TL WA901ND v3 with Router TL WR1043ND. I have to say that both devices working good but not together.
Situation is next:
First I buy accespoint wa901nd and successfully connect him to ISPs modem-router Enkom. I used it to netstreaming TV programs from Dreambox satellite reciver. That works fine but from time to time I experienced glitches, lags,.. Speed was 54g. So I decide to buy new router with bigger speed and I brought router from TPlink wr1043nd v2. Connection with satellite reciver was much better but problem has occurred when I try connect this two devicer, accesspoint 901md with router 1043nd. I did not link them to work together after many trying. I contact TL support and they give me advices what to do. After no success with connecting I conclude that accesspoint stoped working. Is no longer wanted to connect with ISPs Enkom router. Router 1043nd continued work fine.
So I took accesspoint 901nd to store where I buy and they take it to service. After 20 days waiting they given to me new accesspoint 901nd. When I came home and tray connect this new accesspoint 901nd with router 1043nd occurred the same thing like before. First I try connect him with router 1043nd. Accesspoint wont connect with this router and after no success I try connect them with ISPs routher and there was no success.
My conclusion is that TL router wr1043nd v2 and accesspoint WA901ND v3 are not compatibile devices. Router brick accesspoint.
I try find experiences of other people over the internet about this two devices and I found that I am not only one with this problems. Links:
http://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/unable-configure-tp-link-tl-wa901nd-access-point-repeater-3576971.html
http://www.tomshardware.co.uk/forum/35640-43-tplink-router-access-point
I took and this accesspoint to store where I buy them and now am waiting what they will say to me. I need good accespoint 300Mbps which is in repeater mode and is compatible with router 1043nd v2. I don't want many back, so if anyone has advice witch accesspoint work surely with router 1043nd please tell me.
Regards,
Zlatko
Model : TL-WR1043ND
Hardware Version : V2
Firmware Version : TL-WR1043ND_V2_130925
ISP : Iskon---Croatian ISP
Hello to all.
My name is Zlatko. I have problem with connecting TPlink accesspoint TL WA901ND v3 with Router TL WR1043ND. I have to say that both devices working good but not together.
Situation is next:
First I buy accespoint wa901nd and successfully connect him to ISPs modem-router Enkom. I used it to netstreaming TV programs from Dreambox satellite reciver. That works fine but from time to time I experienced glitches, lags,.. Speed was 54g. So I decide to buy new router with bigger speed and I brought router from TPlink wr1043nd v2. Connection with satellite reciver was much better but problem has occurred when I try connect this two devicer, accesspoint 901md with router 1043nd. I did not link them to work together after many trying. I contact TL support and they give me advices what to do. After no success with connecting I conclude that accesspoint stoped working. Is no longer wanted to connect with ISPs Enkom router. Router 1043nd continued work fine.
So I took accesspoint 901nd to store where I buy and they take it to service. After 20 days waiting they given to me new accesspoint 901nd. When I came home and tray connect this new accesspoint 901nd with router 1043nd occurred the same thing like before. First I try connect him with router 1043nd. Accesspoint wont connect with this router and after no success I try connect them with ISPs routher and there was no success.
My conclusion is that TL router wr1043nd v2 and accesspoint WA901ND v3 are not compatibile devices. Router brick accesspoint.
I try find experiences of other people over the internet about this two devices and I found that I am not only one with this problems. Links:
http://forums.hardwarezone.com.sg/internet-bandwidth-networking-clinic-4/unable-configure-tp-link-tl-wa901nd-access-point-repeater-3576971.html
http://www.tomshardware.co.uk/forum/35640-43-tplink-router-access-point
I took and this accesspoint to store where I buy them and now am waiting what they will say to me. I need good accespoint 300Mbps which is in repeater mode and is compatible with router 1043nd v2. I don't want many back, so if anyone has advice witch accesspoint work surely with router 1043nd please tell me.
Regards,
Zlatko