Can't get Access Control to work with https pages.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Can't get Access Control to work with https pages.
Region : Argentina
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.34 Build 109009 Rel.53148n
ISP :
Hi, maybe I can get some help; been trying several things to no avail.
I have a WDR3600 v1 on 3.13.34 Build 109009 Rel.53148n.
The setting I'm trying to achieve is to limit my children to sites that have certain words in their url/domain.
The setting I'm trying to get to work is this:
My children PC IP Addresses are 10.0.2.10 to 10.0.2.20 and all the adults PCs have addresses such as 10.0.2.100 and higher; so I have these definitions:
Hosts:
Lows: 10.0.0.10-10.0.2.99
Highs: 10.0.2.100-10.0.2.199
All: 10.0.2.10-10.0.2.199
Targets:
Edus:
Mode: Domain Name
Domain Name: edu
DNSs:
Mode: IP Address
Port: 53
Access Control Settings
Enable Internet Access Control: Tick
Default Filter Policy: Allow the ...
Rules:
1) Name: DNS Passes
Host: All
Target: DNSs
Schedule: Permanent
2) Name: EDUs
Host: Lows
Target: Edus
Schedule: Permanent
3) Name: HIGH Passes
Host: Highs
Target: Any
Schedule: Permanent
With this setup, a computer in the low address range can go to a site like www.example.edu and after a while it connects; but when selecting or entering a https url (like https://sso.example.edu/login) then it keeps on going for ever and eventually I get an error.
So, is there a way to get the https sites to work? Am I missing something?
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.34 Build 109009 Rel.53148n
ISP :
Hi, maybe I can get some help; been trying several things to no avail.
I have a WDR3600 v1 on 3.13.34 Build 109009 Rel.53148n.
The setting I'm trying to achieve is to limit my children to sites that have certain words in their url/domain.
The setting I'm trying to get to work is this:
My children PC IP Addresses are 10.0.2.10 to 10.0.2.20 and all the adults PCs have addresses such as 10.0.2.100 and higher; so I have these definitions:
Hosts:
Lows: 10.0.0.10-10.0.2.99
Highs: 10.0.2.100-10.0.2.199
All: 10.0.2.10-10.0.2.199
Targets:
Edus:
Mode: Domain Name
Domain Name: edu
DNSs:
Mode: IP Address
Port: 53
Access Control Settings
Enable Internet Access Control: Tick
Default Filter Policy: Allow the ...
Rules:
1) Name: DNS Passes
Host: All
Target: DNSs
Schedule: Permanent
2) Name: EDUs
Host: Lows
Target: Edus
Schedule: Permanent
3) Name: HIGH Passes
Host: Highs
Target: Any
Schedule: Permanent
With this setup, a computer in the low address range can go to a site like www.example.edu and after a while it connects; but when selecting or entering a https url (like https://sso.example.edu/login) then it keeps on going for ever and eventually I get an error.
So, is there a way to get the https sites to work? Am I missing something?