Home Network Community > Wi-Fi Routers > WR1043ND - No access to GUI/front page after several days unless I reboot the router
< Wi-Fi Routers

WR1043ND - No access to GUI/front page after several days unless I reboot the router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WR1043ND - No access to GUI/front page after several days unless I reboot the router

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WR1043ND - No access to GUI/front page after several days unless I reboot the router
WR1043ND - No access to GUI/front page after several days unless I reboot the router
2014-09-06 18:24:51
Region : UnitedKingdom

Model : TL-WR1043ND

Hardware Version : V1

Firmware Version : 3.13.15 Build 140319 Rel.41339n

ISP :

Hello,

I have had this problem since day one. No matter which Firmware version I install (currently using the latest official release - 3.13.15 Build 140319 Rel.41339n) I am unable to access the router's GUI/front page after several days of use.

I have the LAN IP address set to 192.168.0.1 and I can access the interface once I reboot. But after several days, I return to 192.168.0.1 and cannot connect. Rebooting resolves the issue, but it is rather annoying that I have to do this each time I want to access the router interface. I certainly wouldn't be able to setup remote access with this current issue.

Regards,
Richard.
  0      
 
  0      
 
#1
Options
4 Reply
Re:WR1043ND - No access to GUI/front page after several days unless I reboot the router
2014-09-18 09:39:27
Same problem here with TWO of them.. Bought the second one thinking the first was bad.....

Just sent email to support - we'll see what happens





RSL Designs wrote

Region : UnitedKingdom

Model : TL-WR1043ND

Hardware Version : V1

Firmware Version : 3.13.15 Build 140319 Rel.41339n

ISP :

Hello,

I have had this problem since day one. No matter which Firmware version I install (currently using the latest official release - 3.13.15 Build 140319 Rel.41339n) I am unable to access the router's GUI/front page after several days of use.

I have the LAN IP address set to 192.168.0.1 and I can access the interface once I reboot. But after several days, I return to 192.168.0.1 and cannot connect. Rebooting resolves the issue, but it is rather annoying that I have to do this each time I want to access the router interface. I certainly wouldn't be able to setup remote access with this current issue.

Regards,
Richard.
  0  
  0  
#2
Options
Re:WR1043ND - No access to GUI/front page after several days unless I reboot the router
2014-09-30 16:05:42
have you tried different browsers...?
  0  
  0  
#3
Options
Re:WR1043ND - No access to GUI/front page after several days unless I reboot the router
2014-10-03 03:25:01

wb2vsj wrote

Same problem here with TWO of them.. Bought the second one thinking the first was bad.....

Just sent email to support - we'll see what happens
I have this same problem and the suppler replaced a few of them with the V2 version (black routers instead of white) and they work fine. For the ones they didn't replace they flashed with Gargoyle firmware (free) and now they work amazing.

-Jamie M.
  0  
  0  
#4
Options
Re:WR1043ND - No access to GUI/front page after several days unless I reboot the router
2014-10-10 02:46:53
@goofy gorilla - yep. Tried it in FF, Chrome and Safari.. still the same.

@wb2vsj - any news from support?

@toysareforboys - I will have to look into this Gargoyle Router version. Any pitfalls?
  0  
  0  
#5
Options

Information

Helpful: 0

Views: 611

Replies: 4

Related Articles
Access to bridge modem Web GUI
1422 0
Can't access web GUI
747 0
Find admin page after Access Point config
1261 0
Remote Cloud Access to Router's Web GUI
344 1
WR1043ND cannot access admin page
1253 0
There is no advanced tab after log in page
427 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.