Archer C7 v2 web management problem after firmware update
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.Archer C7 v2 web management problem after firmware update
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-23
2014-09-23 21:36:52
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-23
Archer C7 v2 web management problem after firmware update
2014-09-23 21:36:52
Tags:
Region : UnitedStates
Model : Archer C7
Hardware Version : Not Clear
Firmware Version : 3.14.1 Build 140911
ISP :
Hello! After successfully updating Archer C7 v2 firmware to version "3.14.1 Build 140911 Rel.41201n" I cannot use the web management interface properly anymore.
While clicking the links from the left panel the browser is redirected to the login page saying:
"The router allows only one administrator to login at the same time, please try again later."
This is very annoying, I'm pretty sure there is no one using the admin interface besides me.
I even turned off the wireless radio but this message persist.
I've also tried to admin the device via Tether app without success... the app always says "Router not Supported".
Whats happening here guys??!!
I've flashed this firmware several times, hard reseted the Archer router, changed browser... etc etc... nothing works!
I can barely navigate to the web admin pages without been kicked out!!!
I didn't finished my router setup because of this BUG.
Yes, I can navigate, the Archer is working but I just cannot setup it the way I like/need.
Any help is welcome! TIA.
Model : Archer C7
Hardware Version : Not Clear
Firmware Version : 3.14.1 Build 140911
ISP :
Hello! After successfully updating Archer C7 v2 firmware to version "3.14.1 Build 140911 Rel.41201n" I cannot use the web management interface properly anymore.
While clicking the links from the left panel the browser is redirected to the login page saying:
"The router allows only one administrator to login at the same time, please try again later."
This is very annoying, I'm pretty sure there is no one using the admin interface besides me.
I even turned off the wireless radio but this message persist.
I've also tried to admin the device via Tether app without success... the app always says "Router not Supported".
Whats happening here guys??!!
I've flashed this firmware several times, hard reseted the Archer router, changed browser... etc etc... nothing works!
I can barely navigate to the web admin pages without been kicked out!!!
I didn't finished my router setup because of this BUG.
Yes, I can navigate, the Archer is working but I just cannot setup it the way I like/need.
Any help is welcome! TIA.
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
42 Reply
Posts: 19
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-02-11
Re:Archer C7 v2 web management problem after firmware update
2014-10-04 23:27:12
10sec is fairly enough for TPLink ;)
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#12
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 2171
Helpful: 88
Solutions: 0
Stories: 0
Registered: 2013-01-12
Re:Archer C7 v2 web management problem after firmware update
2014-10-04 23:32:17
I know, but sometimes hard reset 30/30/30 is last chance for factory default. Many times about this I convinced
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#13
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-10-04
Re:Archer C7 v2 web management problem after firmware update
2014-10-05 16:50:52
Thank you for your suggestion, but hard reset did not work. I've opened a ticket with Tp-link, let's see what they say. Otherwise I'll have to return the router to the shop.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#14
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 19
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-02-11
Re:Archer C7 v2 web management problem after firmware update
2014-10-05 17:12:52
funny, you have to be doing something wrong... It worked multiple times for me.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#15
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-10-14
Re:Archer C7 v2 web management problem after firmware update
2014-10-14 04:56:25
"The router allows only one administrator to login at the same time, please try again later."
I just registered here to vent my frustration at this too...
I setup the router at customer premise all ok. I need to forward another port so I tried to login remotely and I get this message. I even tried the same laptop as I used at the customer.
I had the customer reboot the router, no change. Now I have to make a 90km round-trip just to log-in to a router...
I hope I can re-login with my laptop once I'm there or I'll have to factory reset and do everything all over...
I'm going to have a drink now, it has NOT been my day today.
best regards
David
I just registered here to vent my frustration at this too...
I setup the router at customer premise all ok. I need to forward another port so I tried to login remotely and I get this message. I even tried the same laptop as I used at the customer.
I had the customer reboot the router, no change. Now I have to make a 90km round-trip just to log-in to a router...
I hope I can re-login with my laptop once I'm there or I'll have to factory reset and do everything all over...
I'm going to have a drink now, it has NOT been my day today.
best regards
David
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#16
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 926
Helpful: 17
Solutions: 1
Stories: 0
Registered: 2012-10-29
Re:Archer C7 v2 web management problem after firmware update
2014-10-14 09:09:21
David, you may have to restore all settings to factory default and reconfigure it after upgrade the latest firmware.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#17
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 14
Helpful: 0
Solutions: 2
Stories: 0
Registered: 2014-10-14
Re:Archer C7 v2 web management problem after firmware update
2014-10-16 07:53:19
v2 with the latest firmware here. I can login to the remote admin interface, but I usually end up having to enter the login credentials at least twice everytime. The first time I enter them, it returns me back to the login page.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#18
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 926
Helpful: 17
Solutions: 1
Stories: 0
Registered: 2012-10-29
Re:Archer C7 v2 web management problem after firmware update
2014-10-16 08:58:26
Tangles, you tried different web browsers or PCs? Is it a issue coming with latest firmware or not?
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#19
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 14
Helpful: 0
Solutions: 2
Stories: 0
Registered: 2014-10-14
Re:Archer C7 v2 web management problem after firmware update
2014-10-16 11:47:08
Yes I've tried multiple browsers and can make it happen (and different PCs) I've tried three so far. Running the latest firmware offered on the downloads page for v2 hardware: 3.14.1 Build 140911 Rel.41201n
Mostly it happens when I try to access it from the remote management port and I'm using no-ip.com for DDNS.
Things to note: I've changed the IP from 192.168.0.1 to 192.168.1.1 (to save me the headache of reconfiguring static IPs I have on my network from when I was using a Linksys router)
I also changed the default remote port to 8080 (from 80)
When I login the first time it returns me to the login page and this is in the address bar: http://192.168.1.1:8080/SKBYCAGAMXRSHPCB/userRpm/Index.htm
When I enter the same credentials a second time, it takes me here: http://192.168.1.1:8080/SKBYCAGAMXRSHPCB/userRpm/Index.htm (same URL, so I don't know what's going on) and I have access to the admin interface with no issues.
Mostly it happens when I try to access it from the remote management port and I'm using no-ip.com for DDNS.
Things to note: I've changed the IP from 192.168.0.1 to 192.168.1.1 (to save me the headache of reconfiguring static IPs I have on my network from when I was using a Linksys router)
I also changed the default remote port to 8080 (from 80)
When I login the first time it returns me to the login page and this is in the address bar: http://192.168.1.1:8080/SKBYCAGAMXRSHPCB/userRpm/Index.htm
When I enter the same credentials a second time, it takes me here: http://192.168.1.1:8080/SKBYCAGAMXRSHPCB/userRpm/Index.htm (same URL, so I don't know what's going on) and I have access to the admin interface with no issues.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#20
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 4
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-10-18
Archer C7 v2 web management problem after firmware update
2014-10-18 03:24:41
I also just upgraded firmware and had access to UI but once I reconfigured everything and rebooted I no longer can access the UI nor the USB storage. internet traffic is being routed.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#21
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-23
2014-09-23 21:36:52
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2014-09-23
Information
Helpful: 0
Views: 6413
Replies: 42
Voters 0
No one has voted for it yet.
Tags
Related Articles
Archer C7 V2 firmware
944
0
Report Inappropriate Content
Transfer Module
New message