Home Network Community > Access Points > TL-W5210G no POE working
< Access Points

TL-W5210G no POE working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-W5210G no POE working

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-W5210G no POE working
TL-W5210G no POE working
2014-09-24 22:46:29
Region : India

Model : TL-WA5210G

Hardware Version : WA5210G v1 0816301C

Firmware Version : 4.4.5 Build 111209 Rel.40972n

ISP :

I have TL-W5210G outdoor CPE the problem is when I connect it via LAN Cable POE 10 meters from router,power LED on but others LEDs blink. I used TIA568A and TIA56B but no avail. I read somewhere in this forum using local non branded LAN cable root cause of this issue. because i think im using some non branded cable NETCONNECT. CAT6E no standard mentioned over cable sheath EIA/TIA 568A & 568B Standard




Firmware Version: 4.4.5 Build 111209 Rel.40972n
Hardware Version: WA5210G v1 0816301C
Model No. TL-WA5210G
  0      
 
  0      
 
#1
Options
4 Reply
Re:TL-W5210G no POE working
2014-09-28 00:31:23

fotodamaris wrote

What happens when you use the short cable that comes in the box


Works fine no problem if i use any other branded 1.5Meter short cable came with linksys router and TPLink TL-WA5210G. Just this unbranded cable not working.
  0  
  0  
#3
Options
Re:TL-W5210G no POE working
2014-09-28 03:35:54
Yes right now i'm using same wire between TL-WA5210G and TP Link TL-WR941N Router it works Fine no issues at all and using short wire to power up the TL-WA5210G via POE.
Crimped 3 times 568B same issue don't know why. But one thing why it powering up via short cable no blinking,
Why POE works with short cable if POE is culprit:confused:
  0  
  0  
#5
Options
Re:TL-W5210G no POE working
2014-09-28 04:50:05

fotodamaris wrote

faulty POE

Any good logic why POE work with short cable not with 10 meter Cable.
  0  
  0  
#7
Options
Re:TL-W5210G no POE working
2014-09-28 19:13:06

fotodamaris wrote

well I did answer your question faulty is faulty, but i will post this example.
You own a stick gear car (not automatic) on flat ground runs perfect, but when you want to take it uphill it does not climb, why, simply cause you have a faulty clutch, not broken 100% lets say 50% reason why on flat ground never shows the issue, same as you faulty POE its not broken 100%
dont forget TL products have 2 year warranty,


LOL i will try to replace POE first then update you
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 946

Replies: 4

Related Articles
TL-WA701ND with PoE
980 0
TL-WA801N POE
629 0
 W5210G CPE cabling scheme
1766 0
 POE Not Working
732 0
TL-SF1005P - PoE question
198 0
 TL-WPA4220 & POE
1246 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.