Cannot login after IP number change

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Cannot login after IP number change

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Cannot login after IP number change
Cannot login after IP number change
2014-10-21 04:08:39
Region : Germany

Model : Archer C7

Hardware Version : Not Clear

Firmware Version : Archer C7_v1_140903

ISP : KDG


Hi,

I encountered following problem after upgrading the firmware to Archer C7_v1_140903.

Whenever I change the IP number of the router from 192.168.0.1 to 192.168.1.1 I cannot login into the WebGUI.
I setup everything after the firmware upgrade. I restarted the router several times and everything works fine.

After everything was in place i changed the IP number from 192.168.0.1 to 192.168.1.1 to meet the needs of my network.
After the restart I cannot login anymore to the WebGUI.

I reset to factory settings by pressing the reset button for 15 seconds. Everything was OK again. I changed the setup again and as before everything worked until i changed the IP address.

Same as before the router worked, but I cannot access the WebGUI.

When I enter username and password and press enter I get a new empty login mask.

Is there a work around ?? I want to use the new update for better 5GHz support.

Bye Matze
  0      
  0      
#1
Options
5 Reply
Re:Cannot login after IP number change
2014-10-21 09:16:13
What's the IP number of your modem? Is there IP conflict if you change router's IP to 192.168.1.1?
Try a different one like 192.168.2.1. Does it work?
  0  
  0  
#2
Options
Re:Cannot login after IP number change
2014-10-21 14:26:12
Before upgrading and after downgrading the router had 192.168.1.1.
I have tried a private connection with a cable between the router and my laptop and configured my laptop to 192.168.1.200.
Only the laptop and the router in the network and I had the same effect.
  0  
  0  
#3
Options
Re:Cannot login after IP number change
2014-10-22 09:52:26
Default IP should be 192.168.0.1...
If only laptop and router in the network, with DHCP on, what's the IP address and default gateway obtained automatically?
  0  
  0  
#4
Options
Re:Cannot login after IP number change
2014-10-25 15:35:31
Hi Ada,

I don't use dhcp on the router. The IP of the laptop is fixed and set to 192.168.0.200 (works) and to 192.168.1.200 after the change (doesn't work).
I can ping the router under 192.168.1.1 but cannot log in :(

Bye
Matze
  0  
  0  
#5
Options
Re:Cannot login after IP number change
2014-10-25 17:26:59
Hi,

Are you using a "clean" PC?
I mean without software firewall, antivirus web security, browser history/cookies, etc.
  0  
  0  
#6
Options

Information

Helpful: 0

Views: 1757

Replies: 5

Related Articles