AC1750 randomly stops routing, but router is accessible
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AC1750 randomly stops routing, but router is accessible
Region : Albania
Model : Archer C7
Hardware Version : v2
Firmware Version : last (09/2014)
guys I have the following setup:
internet -->(wan) Router1(lan)-->(wan) ArcherC7(wifi+lan)-->client devices
The C7 gets WAN IP via DHCP from Router1 (Linksys)
---
so all is great, but at random intervals the C7 stops passing internet. Connection is up, adminUI is accessible - all is fine, just no internet.
Still there IS network access between the 2 routers as I can access the Router1 etc.
the "fix" I have found is to ask C7 to release/renew its WAN IP - connection starts again.
any ideas?
DHCP lease is set to not expire though
Model : Archer C7
Hardware Version : v2
Firmware Version : last (09/2014)
guys I have the following setup:
internet -->(wan) Router1(lan)-->(wan) ArcherC7(wifi+lan)-->client devices
The C7 gets WAN IP via DHCP from Router1 (Linksys)
---
so all is great, but at random intervals the C7 stops passing internet. Connection is up, adminUI is accessible - all is fine, just no internet.
Still there IS network access between the 2 routers as I can access the Router1 etc.
the "fix" I have found is to ask C7 to release/renew its WAN IP - connection starts again.
any ideas?
DHCP lease is set to not expire though