Home Network Community > Wi-Fi Routers > Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
< Wi-Fi Routers

Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
2014-11-30 01:05:26
Region : Netherlands

Model : TL-WDR3600

Hardware Version : V1

Firmware Version : 3.14.1 Build 140916 Rel.65058n

ISP : Ziggo, The Netherlands

Hello,

I try to use System Log. Unfortunately it is being flooded with the messages every 1 second as below. Because system log is wrap around, other messages are lost quickly. I have already disabled IP v6, that does not stop those messages. My understanding is that my ISP does not provide IPv6 support. The WAN port of my WD3600 is connected to the ISP (Ziggo, The Netherlands) provided cable modem. How can is stop those message to be issued?

Nov 29 17:33:53 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:33:54 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:33:56 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:33:58 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:33:59 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:34:00 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:34:01 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:34:03 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:34:04 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:34:06 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:34:07 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
Nov 29 17:34:08 DHCP INFO dhcp6c_ipc_data_rcv 75: wantype is 1, status is 2, cmd is 1, valid lifetime is 0, preferred lifetime is 0
  0      
 
  0      
 
#1
Options
8 Reply
Re:Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
2014-12-01 10:13:29
Any trouble to access internet?
What kinds of log are you trying to check? To select Log Level won't help?
By the way, your firmware is not the latest version.
  0  
  0  
#2
Options
Re:Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
2014-12-02 20:33:17
No trouble connecting to internet
Trying to see when wifi devices connect and leave, Selecting log level does not help, seem all INFO msg
Thanks for remark about FW level, apparently just upgraded before new release. I will upgrade asap and try again.

When unplugging cable form WAN the "dhcp6c_ipc_data_rcv" msg disappear.

Thanks!
  0  
  0  
#3
Options
Firmware upgrade
2014-12-02 21:35:53
Hi guys!!

I've a WDR7500 Archer V3 with chinese firmware. I tryed to upgrade with the new firmware Archer_C7_V2_V3_14092 in english but didn't get success.
Does someone have the same problem and got resolve?
  0  
  0  
#4
Options
Archer C7 V3
2014-12-02 21:48:04
Hi everyone,

I have a WDR7500 with chinese firmware. I tryed to upgrade with the new english firmware Archer_C7_V2_V3_14092_9 but I didn't get success.
Did someone have the same problem and resolved that?
Thanks
  0  
  0  
#5
Options
Re:Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
2014-12-03 13:46:51
WDR7500 and C7 are two different products.
Why you buy a Chinese product?
Chinese products cannot be upgraded to English version...
If you don't understand Chinese at all, it is absolutely a bad choice for you.
  0  
  0  
#6
Options
Re:Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
2014-12-07 01:31:24
firmware upgraded to: 3.14.1 Build 141022 Rel.33470n

But problem still exists: Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
  0  
  0  
#7
Options
Re:Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
2014-12-08 10:49:59
I don't know what does it mean. But since your internet is working OK, maybe it is not a big deal. If you do care, confirm with TP-LINK technician.
http://www.tp-link.com/en/Support/contact/
  0  
  0  
#8
Options
Re:Messages lost due to System Log flooded with msg: dhcp6c_ipc_data_rcv
2014-12-08 18:15:46
My understanding is that my ISP does not provide IPv6 support.

Are you sure that your ISP doesn't support IPv6? It's only INFO status. I think there is nothing to worry about.
  0  
  0  
#9
Options

Information

Helpful: 0

Views: 714

Replies: 8

Related Articles
INFO message "UpdateAllStaOnlineTime" fills system log
540 0
System Log Type messages
584 0
System log full with "unknown option" messages
206 1
Error log msg
4131 2
AX6000 System Log Empty
542 0
Understanding the system Log
211 0
About Us
Press
Copyright © TP-LINK CORPORATION PTE. LTD. All rights reserved.