Starlink V4
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Greetings,
I recently purchased a TP-link router type Archer AX55 AX3000 to use for my starlink version 4 system but it appears that this type of router does not support wireless connection and cannot work as an extender, is there any solutions ? or shall you recommend another type of router that can be compatible with Starlink V4 router and can work as a mesh system with high speed, considering that Starlink router does not support ethernet port
The Dish V4 is paired with an equally new and improved Gen 3 Router
According to its specifications Starlink Gen 3 router has the following parameters:
Starlink Wifi Router
| Product Dimensions | 43.4 x 298.6 x 120.4 mm (1.7 in x 11.76 in x 4.74 in) |
| Wi-Fi Technology | 802.11 a/b/g/n/ac/ax |
| Generation | Wi-Fi 6 |
| Radio | Tri Band 4 x 4 MU-MIMO |
| Ethernet Ports | Two (2) Latching Ethernet LAN ports with removable cover |
| Coverage | Up to 297 m² (3,200 ft²) |
| Operating Temperature | -30°C to 50°C (-22°F to 122°F) |
| Weight | 0.57 kg (1.25 lbs) |
| Security | WPA2 |
| Environmental Rating | Meeting IP56 (Water Resistant), configured for indoor use |
| Power Indicator | LED | face plate, lower left corner of router |
| Mesh Compatibility | Compatible with Starlink Gen 2 and Gen 3 Mesh nodes, up to 3 Starlink Mesh Nodes. *Not compatible with 3rd party mesh systems |
| Devices | Connect up to 235 devices |
You should be able to use one of its ethernet ports to connect to AX55 - check the Ethernet Ports row.
Regarding the mesh network it's not compatible with Easymesh - check the Mesh Compatibility row.
The Dish V4 is paired with an equally new and improved Gen 3 Router
According to its specifications Starlink Gen 3 router has the following parameters:
Starlink Wifi Router
| Product Dimensions | 43.4 x 298.6 x 120.4 mm (1.7 in x 11.76 in x 4.74 in) |
| Wi-Fi Technology | 802.11 a/b/g/n/ac/ax |
| Generation | Wi-Fi 6 |
| Radio | Tri Band 4 x 4 MU-MIMO |
| Ethernet Ports | Two (2) Latching Ethernet LAN ports with removable cover |
| Coverage | Up to 297 m² (3,200 ft²) |
| Operating Temperature | -30°C to 50°C (-22°F to 122°F) |
| Weight | 0.57 kg (1.25 lbs) |
| Security | WPA2 |
| Environmental Rating | Meeting IP56 (Water Resistant), configured for indoor use |
| Power Indicator | LED | face plate, lower left corner of router |
| Mesh Compatibility | Compatible with Starlink Gen 2 and Gen 3 Mesh nodes, up to 3 Starlink Mesh Nodes. *Not compatible with 3rd party mesh systems |
| Devices | Connect up to 235 devices |
You should be able to use one of its ethernet ports to connect to AX55 - check the Ethernet Ports row.
Regarding the mesh network it's not compatible with Easymesh - check the Mesh Compatibility row.