The rx power of the SFP+ module on XYZ's port Te1/0/25 is higher than warning point.
Today I upgraded my companies oc-300 controller to oc-400 and then started getting this warnings:
| The rx power of the SFP module on XYZ's port Te1/0/25 is higher than warning point. |
Should I check the port of the related switch? I did not change on thing on the switch side, how do I further debug and fix the issue?
I'm getting the warning around every 5 minutes.
My SFP+ modules are: Tp-Link TL-SM5110-SR MULTI MOD 10Gbase-LR
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
The new controller system added support to display information about the SFP module. This does not affect your use of the modules.
- Copy Link
- Report Inappropriate Content
I'm getting the warning around every 5 minutes.
.
- Copy Link
- Report Inappropriate Content
Using device terminal i got these data:
The threshold from the switch that triggers the warning (switch A):
show ddm configuration rx_power
Rx Power Threshold(mW) :
High Alarm Low Alarm High Warning Low Warning
Te1/0/25 1.258900 0.063100 1.000000 0.079400
Te1/0/26 -- -- -- --
Te1/0/27 -- -- -- --
Te1/0/28 -- -- -- --
ddm statsus from the switch that triggers the warning (switch A):
show ddm status Temperature(C) Voltage(V) Bias Current(mA) Tx Power(mW) Tx Power(dBm) Rx Power(mW) Rx Power(dBm) Data Ready Rx Los Tx Fault
Te1/0/25 45.097656 3.285100 7.014000 0.624700 -2.043285 1.145400(Warning) 0.589572(Warning) False False False
Te1/0/26 -- -- -- -- -- -- -- -- -- --
Te1/0/27 -- -- -- -- -- -- -- -- -- --
Te1/0/28 -- -- -- -- -- -- -- -- -- --
log from the switch A
show logging
#2025-05-20 21:12:46,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 is higher than warning point.
#2025-05-20 21:12:46,[DDM]/6/Port 25 SFP Module rx power is higher than warning point.
#2025-05-20 21:11:15,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 recovers from the high warning threshold.
#2025-05-20 21:11:15,[DDM]/6/Port 25 SFP Module rx power recover from the high warning threshold.
#2025-05-20 21:10:44,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 is higher than warning point.
#2025-05-20 21:10:44,[DDM]/6/Port 25 SFP Module rx power is higher than warning point.
#2025-05-20 21:08:13,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 recovers from the high warning threshold.
#2025-05-20 21:08:13,[DDM]/6/Port 25 SFP Module rx power recover from the high warning threshold.
#2025-05-20 21:07:42,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 is higher than warning point.
#2025-05-20 21:07:42,[DDM]/6/Port 25 SFP Module rx power is higher than warning point.
#2025-05-20 20:30:17,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 recovers from the high warning threshold.
#2025-05-20 20:30:17,[DDM]/6/Port 25 SFP Module rx power recover from the high warning threshold.
#2025-05-20 20:29:16,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 is higher than warning point.
#2025-05-20 20:29:16,[DDM]/6/Port 25 SFP Module rx power is higher than warning point.
#2025-05-20 20:26:14,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 recovers from the high warning threshold.
#2025-05-20 20:26:14,[DDM]/6/Port 25 SFP Module rx power recover from the high warning threshold.
#2025-05-20 20:25:44,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 is higher than warning point.
#2025-05-20 20:25:44,[DDM]/6/Port 25 SFP Module rx power is higher than warning point.
#2025-05-20 20:19:40,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 recovers from the high warning threshold.
#2025-05-20 20:19:40,[DDM]/6/Port 25 SFP Module rx power recover from the high warning threshold.
#2025-05-20 20:18:09,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 is higher than warning point.
#2025-05-20 20:18:09,[DDM]/6/Port 25 SFP Module rx power is higher than warning point.
#2025-05-20 20:16:38,[SDN]/6/The rx power of the SFP module on [osw:XYZ]'s port Te1/0/25 recovers from the high warning threshold.
#2025-05-20 20:16:38,[DDM]/6/Port 25 SFP Module rx power recover from the high warning threshold.
ddm status from the other end switch (switch B):
show ddm status
Temperature(C) Voltage(V) Bias Current(mA) Tx Power(mW) Tx Power(dBm) Rx Power(mW) Rx Power(dBm) Data Ready Rx Los Tx Fault
Te1/0/25 45.097656 3.285100 7.014000 0.624700 -2.043285 1.145400(Warning) 0.589572(Warning) False False False
Te1/0/26 -- -- -- -- -- -- -- -- -- --
Te1/0/27 -- -- -- -- -- -- -- -- -- --
Te1/0/28 -- -- -- -- -- -- -- -- -- --
- Copy Link
- Report Inappropriate Content
I re-plugged the modules and still the same. I guess I've a faulty or broken unit?
- Copy Link
- Report Inappropriate Content
The new controller system added support to display information about the SFP module. This does not affect your use of the modules.
- Copy Link
- Report Inappropriate Content
I've the exact same modules in my network and only one them gives this error. From my research it may be that the module could be faulty but I need more guideance to see if I need to replace it actually.
- Copy Link
- Report Inappropriate Content
I replaced the sfp+ module on switch A (the one with the warning) and the warning logs are gone
switch A (the sfp+ module with the warnings)
show ddm status
Temperature(C) Voltage(V) Bias Current(mA) Tx Power(mW) Tx Power(dBm) Rx Power(mW) Rx Power(dBm) Data Ready Rx Los Tx Fault
Te1/0/25 45.937500 3.339600 6.972000 0.571200 -2.432118 1.408900(Alarm) 1.488802(Alarm) False False False
switch B
show ddm status
Temperature(C) Voltage(V) Bias Current(mA) Tx Power(mW) Tx Power(dBm) Rx Power(mW) Rx Power(dBm) Data Ready Rx Los Tx Fault
Te1/0/25 45.937500 3.339600 6.972000 0.571200 -2.432118 1.408900(Alarm) 1.488802(Alarm) False False False
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 800
Replies: 6
Voters 0
No one has voted for it yet.