CPE510 as a client and WA7510 as an AP is it posible ?

CPE510 as a client and WA7510 as an AP is it posible ?
CPE510 as a client and WA7510 as an AP is it posible ?
2015-08-07 20:37:27
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :

Hi all
I have 1 CPE510 and 1 WA7510, is there any options to connect CPE510client to WA7510 AP
I removed all restrictions in WA7510,maccontrol .......
SURVEY didn't find WA75010 AP.
Help me pls !!!
0
0
#1
Options
4 Replies
Re:CPE510 as a client and WA7510 as an AP is it posible ?
2015-08-08 19:39:12
Don't use DFS channels
Check MAXTream is disable on 510
They have to be in same channel
0
0
#2
Options
Re:CPE510 as a client and WA7510 as an AP is it posible ?
2015-08-09 08:00:46
my present setup is CPE510 as AP, and 7510 as CLIENT. Works perfectly good! Just disable MAXTream and uncheck DFS.
0
0
#3
Options
Re:CPE510 as a client and WA7510 as an AP is it posible ?
2015-08-11 16:09:54

vinoswald wrote

my present setup is CPE510 as AP, and 7510 as CLIENT. Works perfectly good! Just disable MAXTream and uncheck DFS.


Just need to make sure 7510 is broadcasting a channel that can be detected by CPE510. An easy way is to set CPE510(client mode) to Test mode. In test mode CPE510 can detect every available channel of TL-WA7510N.
0
0
#4
Options
Re:CPE510 as a client and WA7510 as an AP is it posible ?
2015-08-11 19:38:33
In Test Mode and Client mode, doesn't let you set channel, by default is Auto
The only way I had found to set e.g. channel 153 is on AP mode select channel desire, in this case the one set on 7510, once changes are apply, then change the 510 mode to Client, you will see 153 grayed.
0
0
#5
Options