Home Network Community > Wi-Fi Routers > WDR4300 FTP fail to access from WAN IP address
< Wi-Fi Routers

WDR4300 FTP fail to access from WAN IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

WDR4300 FTP fail to access from WAN IP address

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
WDR4300 FTP fail to access from WAN IP address
WDR4300 FTP fail to access from WAN IP address
2015-08-17 02:26:01
Model :

Hardware Version : Not Clear

Firmware Version :

ISP :










Firmware Version: 3.14.2 Build 150331 Rel.60585n
Hardware Version: WDR4300 v1 00000000





I has been enable the FTP service from my router with choose USB folder location. tested local network access the ftp://192.168.0.1 from browser and get the successful result.

-trying disconnect home wifi SSID from my laptop and choosing phone internet then try access FTP from WAN IP address but fail to connect.

-trying to telnet WAN IP address with port 21 and get fail result.

-configure router DMZ and point to 192.168.0.1 then try to telnet again and get result successful connect ftp.

-PC connect phone internet, trying browse my ftp server using WAN IP address also not able to connect.

Please help on my issue.
  0      
 
  0      
 
#1
Options
7 Reply
Re:WDR4300 FTP fail to access from WAN IP address
2015-08-17 10:16:53

superdigi wrote

-configure router DMZ and point to 192.168.0.1 then try to telnet again and get result successful connect ftp.


Hi,

That means you are cascading 2 routers, right?

On the first, you have to set a DMZ and disable the firewall.
  0  
  0  
#2
Options
Re:WDR4300 FTP fail to access from WAN IP address
2015-08-17 11:55:42

HiSpeed wrote

Hi,

That means you are cascading 2 routers, right?

On the first, you have to set a DMZ and disable the firewall.


I only have 1 router. i tested disable the firewall, but still facing same issue. customer still unable to view my ftp item from outside. Besides that, i also tested remote to my customer pc and test the ftp connection from his pc. The result is successful connect to my ftp feature that my router link to USB. Below is the screenshot, so weird that after connected but not allow me to key in username and password. Kindly help.

[ATTACH=CONFIG]2602[/ATTACH]
  0  
  0  
#3
Options
Re:WDR4300 FTP fail to access from WAN IP address
2015-08-17 14:57:19
I don't understand, do you use a bridged ADSL modem?

192.168.0.1 is the WDR4300 LAN or WAN address?

In all cases, a DMZ on your WDR4300 to 192.168.0.1 has no sense !
  0  
  0  
#4
Options
Re:WDR4300 FTP fail to access from WAN IP address
2015-08-17 19:10:09

HiSpeed wrote

I don't understand, do you use a bridged ADSL modem?

192.168.0.1 is the WDR4300 LAN or WAN address?

In all cases, a DMZ on your WDR4300 to 192.168.0.1 has no sense !


No, i dint use bridge ADSL modem. 192.168.0.1 is my WDR4300. without point DMZ to 192.168.0.1, i will not able to telnet 192.168.0.1 21. Im not understand this DMZ use. Maybe you have other way to make this ftp port open without enable DMZ and point it to router IP address.
  0  
  0  
#5
Options
Re:WDR4300 FTP fail to access from WAN IP address
2015-08-17 19:47:18

superdigi wrote

No, i dint use bridge ADSL modem.

In this case, how do you access the web?
What device do you have connected to the WAN port?
Are you using your WDR4300 like an AP or a router?
  0  
  0  
#6
Options
Re:WDR4300 FTP fail to access from WAN IP address
2015-08-18 02:15:24

HiSpeed wrote

In this case, how do you access the web?
What device do you have connected to the WAN port?
Are you using your WDR4300 like an AP or a router?


my laptop connected to WDR4300 SSID through wireless then open safari to access web.
I have a modem "ONU-HUAWEI-HG8240w" that connected a fiber cable, then use LAN 1 connect to my WDR4300 router WAN port.
i using WDR4300 as AP+router.
  0  
  0  
#7
Options
Re:WDR4300 FTP fail to access from WAN IP address
2015-08-18 02:30:52
If I don't make a mistake, ONU-HUAWEI-HG8240w is probably a modem-router not a simple modem.
Consequently you are cascading 2 routers and it's into it you have do do a DMZ to the WAN IP address of your WDR4300...
  0  
  0  
#8
Options

Information

Helpful: 0

Views: 1188

Replies: 7

Related Articles
 WDR4300 FTP fail to access from WAN IP address
759 0
AX73 Remote FTP Server Access IP address changes
498 0
 Fail to obtain the IP address
20475 0
 FTP server WDR4300
397 0
 TL-WDR4300, Windows 8, setting for no-ip for ftp
784 0
 FTP// different WAN IP than obtained in DDNS
486 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.