Business Community > Wireless > EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
< Wireless

Early Access EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)

1234

Early Access EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)

Early AccessEAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-05 03:26:11 - last edited 2025-08-14 03:06:12

This Article Applies To:

 

EAP610-outdoor V1  Fully Adapted to Omada SDN Controller v6.1 or above;

EAP620 HD V3 Fully Adapted to Omada SDN Controller v6.1 or above;

EAP660 HD V2  Fully Adapted to Omada SDN Controller v6.1 or above;

EAP623-outdoor HD V1 Fully Adapted to Omada SDN Controller v6.1 or above;

EAP625-outdoor HD V1 Fully Adapted to Omada SDN Controller v6.1 or above;

EAP655-Wall V1, Fully Adapted to Omada SDN Controller v6.1 or above;

 

Note

 

To update to this pre-release version, please make sure your device version is not lower than the version listed below:

EAP610_outdoor 1.0： 1.3.1 Build 20240828 Rel. 83596

EAP620HD 3.0：1.3.1 Build 20240828 Rel. 82224

EAP623_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649

EAP625_outdoor HD 1.0：1.3.1 Build 20240929 Rel. 44649

EAP660HD 2.0：1.2.0 Build 20240828 Rel. 85483

No limit for EAP655-Wall v1

 

Release Notes:

New Feature/ Enhancement:

1. Supported Omada APs of new VI.

2. Adapted to CE-RED certification.

3. Optimized configuration synchronization mechanism.

4. Optimized automatic adoption.

5. Optimized ACS mechanism.

6. Optimized DFS switching mechanism and radar wave conflict handling.

7. Optimized automatic bandwidth selection mechanism.

8. Optimized background scanning mechanism.

9. Optimized VLAN implementation mechanism.

10. Optimized Log reporting mechanism, adding logs related to DFS, CPU utilization, and more.

11. Optimized PPSK configuration process. Configuring a PPSK profile will only affect the modified entries.

12. Optimized FDB table management mechanism. Wireless connection information will be cleared when the FDB table changes.

13. Optimized CoA-ACK/NAK message cache mechanism.

14. Supported secure firmware download strategy.

15. Supported configuration of WPA3 Enterprise on the Standalone page.

16. Supported configuration of DNS adoption switch (Remote Adoption) on the Standalone page.

17. Supported EAP CLI command system.

18. Modified the default security policy of SSIDs in factory state.

19. Modified the verification rules for static IP configuration items on the Standalone page.

20. Solved the problem of redirection and adoption failure of devices in management state in NAT scenario.

21. Solved the Blast-RADIUS security vulnerability and added a message-authenticator attribute verification switch.

 

 

Beta Firmware Download

 

Attention

 

 Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

EAP610_outdoor v1.0 _1.6.0 (Pre-release Version)

EAP620HD v3.0_1.6.0 (Pre-release Version)

EAP623_outdoor HD v1.0_1.6.0 (Pre-release Version)

EAP625_outdoor HD v1.0_1.6.0 (Pre-release Version)

EAP660HD v2.0_1.6.0 (Pre-release Version)

EAP655-Wall v1.0_1.6.0 (Pre-release Version)

 

Notes:

(1) Your device’s configuration won’t be lost after upgrading.

(2) The above firmware is fully adapted to Omada SDN Controller v6.1 and above

 

Update Log

 

5th Jun, 2025

 

Provide the pre-release link:

 

EAP610_outdoor v1.0 _1.6.0 (Pre-release Version)

EAP620HD v3.0_1.6.0 (Pre-release Version)

EAP623_outdoor HD v1.0_1.6.0 (Pre-release Version)

EAP625_outdoor HD v1.0_1.6.0 (Pre-release Version)

EAP660HD v2.0_1.6.0 (Pre-release Version)

EAP655-Wall v1.0_1.6.0 (Pre-release Version)

 

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about firmware upgrade, it's suggested to include the following info:

  • Management mode (Controller or Standalone)
  • Device Model(s) and Hardware
  • Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0      
 
  0      
 
#1
Options
1 Accepted Solution
Re:EAP6xx Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)-Solution
2025-06-18 02:13:27 - last edited 2025-06-18 02:13:31

 

 

Below is the trial experience post for some other WiFi 6 models:

EAP65x | EAP67x Pre-release Firmware Adapted to Omada Controller v6.0 (Released on 18th Jun, 2025)

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
Recommended Solution
  0  
  0  
#13
Options
35 Reply
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-05 07:31:32

  @Vincent-TP 

 

At this point im really starting to wonder - is there some reason the EAP650 and 653 arent included in this or the last batch of beta's from a few months ago ?  

 

The 650 did get a minor update a while ago, but still only 5.14 adapted firmware, its been completely missing from 5.15 adaptations now for about 5 months.

 

Has it gone EOL or something? some kind of issue preventing it getting a 5.15 adapted firmware?

 

 

I know you guys can only post what the devs / management allow you to post....but.....this is starting to get a bit concerning.

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
  1  
  1  
#2
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-05 07:49:01

  @GRL 

 

Most of Omada devices are EOL, it worries me a lot, I will have to consider other suppliers soon. TP-Link is spewing out new hardware versions at a rapid pace and a lot of it is not very old before it is EOL, here you can see the status for yourself,

 

https://static.tp-link.com/upload/manual/2025/202504/20250427/EOL%20List_Business_V4.0.pdf

  4  
  4  
#3
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-06 09:08:38 - last edited 2025-06-06 20:01:44

@GRL  As per this FAQ https://www.tp-link.com/nordic/support/faq/3648/ the EOM (End of Maintenance, which I supposed could also refer to firmware support, I might be wrong) is 3 YRS after EOS (End of Sale) date.

 

So for an EAP650 v1 (like the ones I have) it should be 2027 the EOM.

  2  
  2  
#4
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-06 18:30:38

  @Vincent-TP 

 

The fact the 690E HD is still being ignored and not acknowledged by staff here is shameful. 

 

current firmware for it doesn't even handle ipv6 

 

I own two of these and this was the flagship..... Take them back from me and replace with the 773s make things right. Or assist in some way so that we have a properly supported product.

  0  
  0  
#5
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-10 03:51:01

  @Vincent-TP  has controller v6.1 been released ?

  0  
  0  
#6
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-12 08:25:26

  @IamMurphy 

@GRL 

@MR.S 

 

Thank you for your active engagement and feedback regarding the End-of-Life (EOL) status of some EAP models. Our team truly appreciates your support, and we understand your concerns about the transition timeline for these devices.

 

As technology and market demands evolve rapidly, our product strategies must adapt to ensure we deliver the latest innovations and optimal solutions to our customers. Our teams recognize the importance of maintaining your trust in TP-Link and are continually working to ensure that you can make the most of your devices.

 

While certain models may enter the EoL phase sooner than expected, please be assured that we remain committed to providing technical support for a defined period (typically 3 years post-EOL) to facilitate a smooth experience with your current devices. Additionally, the EoL status does not affect the warranty coverage of your product.

 

If you encounter specific issues with your EAP devices, please share any detailed information. Our team will do our best to address your feedback and forward your case to the relevant teams.

 

Thank you again for being part of our community and working with our teams to provide a better experience for all our users.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#7
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-12 08:25:50

Hi  @Hobbs1210 

 

Not yet. 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#8
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-12 09:00:29

  @Vincent-TP 

 

So, are you saying the 650 is actually EOL and wont be getting any further feature improvements?

Main: ER8411 x1, SG3428X x1, SG3452 x1, SG2428LP x1, SG3210 x1, SG2218P x1, SG2008P x3, ES208G x1, EAP650 x6 Remote: ER7206 v2 x1, ER605 v2 x3, SG2008P x2, EAP650 x2, ES205G x1 Controller: OC300
  0  
  0  
#9
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-12 09:51:13

Hi  @GRL 

 

Nope.

 

Below is an explanation of EOS (end of sales):

 

 

TP-Link End-of-Life Policy

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#10
Options
Re:EAP6XX Pre-release Firmware Adapted to Omada Controller v6.1 (Released on 5th Jun, 2025)
2025-06-12 15:09:53

  @Vincent-TP 

 

I get that you are front line but don't make the decisions,

 

the 690E HD first became available in Canada in July 23 and the firmware is dated May

 

Firmware Version

1.0.3 Build 20230510 Rel. 46843

Model

EAP690E HD(US) v1.0

 

So not a single firmware update ........

 

And this was the Flagship device.

 

My ubiquiti E7 showed up yesterday slowly making the move away from all tp link for me and my customers.

 

This reply showed me there is no care for your clients 

  1  
  1  
#11
Options
1234

Information

Helpful: 0

Views: 4365

Replies: 35

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.