Unable to reset device TL-WR740N
Hardware Version : Not Clear
Firmware Version :
ISP :
Unable to reset device TL-WR740N even after clicking the reset button which is located at the back of the device . Please help
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
link is not functional... please send another link where we can get 30/30/30 reset steps.
jimasek wrote
Can you try 30/30/30 hard reset - http://www.jimasek.elektroda.eu/index.php/poradniki/66-hard-reset-30-30-30
- Copy Link
- Report Inappropriate Content
what if 30/30/30 reset not work because i got steps from another site as below
Hard Reset (aka 30/30/30 reset):
The following procedure will clear out the NVRAM and set dd-wrt back to default values:
1) With the unit powered on, press and hold the reset button on back of unit for 30 seconds
2) Without releasing the reset button, unplug the unit and hold reset for another 30 seconds
3) Plug the unit back in STILL holding the reset button a final 30 seconds, then release the button
but still my TL-WR740N on the same state like only power led found.
if any prominent solution you please share or i scrap the tp-link device.
regards,
Tanveer Hussain
- Copy Link
- Report Inappropriate Content
I will suggest you reinstall the router and reinsert all the ports of the router and then reset it. If still, you can't reset the router, consult with epson error code 0xf4. It will explain how to reset the router in some another method.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2892
Replies: 5
Voters 0
No one has voted for it yet.