Home Network Community > Deco > Deco outdoor not joining my deco x10 mesh
< Deco

Deco outdoor not joining my deco x10 mesh

Deco outdoor not joining my deco x10 mesh

Deco outdoor not joining my deco x10 mesh
Deco outdoor not joining my deco x10 mesh
2025-08-12 22:04:28 - last edited 2025-08-13 06:48:01
Model: Deco X10   Deco X50-Outdoor  
Hardware Version:
Firmware Version: 1.2.1 Build 20250608 Rel. 76593

Hi

 

I have a running x10 mesh with 3 units running the 1.2.1 firmware. I just got a deco x50-outdoor and it refuses to show up in my mesh. I have tried it as a primary on its on and it works but it dos not se the x10s and vise versa. When i trie and set it up on the mesh it just continues to blink blue.

 

What firmware version should the x50-outdoor have to be able to run with my x10s?

 

Current firmware on the x50-outdoor is 1.3.0 Build 20250718 Rel. 43619

  2      
 
  2      
 
#1
Options
1 Accepted Solution
Re:Deco outdoor not joining my deco x10 mesh-Solution
2025-08-13 05:10:12 - last edited 2025-08-13 06:48:01

  @HelpFixDecoApp 

 

Hi 

You can close this post. I got it working. The x50 outdoor did not pop up as new units but was able to connect via the add new device in the app. Silly me for not trying that before.

Recommended Solution
  1  
  1  
#4
Options
4 Reply
Re:Deco outdoor not joining my deco x10 mesh
2025-08-13 04:22:44

  @Kull 

 

Just an FYI I let one of the TP-link staff know about this post since I have seen issues with the X50 outdoor unit in the past they will get back to you as soon as they can 

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#2
Options
Re:Deco outdoor not joining my deco x10 mesh
2025-08-13 04:28:45
Thank you
  0  
  0  
#3
Options
Re:Deco outdoor not joining my deco x10 mesh-Solution
2025-08-13 05:10:12 - last edited 2025-08-13 06:48:01

  @HelpFixDecoApp 

 

Hi 

You can close this post. I got it working. The x50 outdoor did not pop up as new units but was able to connect via the add new device in the app. Silly me for not trying that before.

Recommended Solution
  1  
  1  
#4
Options
Re:Deco outdoor not joining my deco x10 mesh
2025-08-13 05:11:55

  @Kull

 

Glad you got it working :)  

Need help with the Deco app, setup, Ethernet backhaul, network switch or rolling back firmware? Router or AP mode? https://community.tp-link.com/us/home/forum/topic/699816?page=1
  0  
  0  
#5
Options

Information

Helpful: 2

Views: 144

Replies: 4

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.