Routing with ip WAN
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Routing with ip WAN
Model : Archer C2
Hardware Version : Not Clear
Firmware Version : 0.9.1 0.11 v0032.0 Build 141117 Rel.54392n
ISP :
Hi!
When i set router with static ip address, by example:
ip: 192.168.10.1
Gateway: 192.168.10.100
Mask: 255.255.255.0
and set dhcp from stations in wireless / lan:
Lan: 192.168.1.1
Range DHCP: 192.168.1.2 - 192.168.1.254
Mask: 255.255.255.0
the ip source (source package) from request (192.168.1.?) to gateway (192.168.10.100) become with a source ip 192.192.10.1 (my wan ip), no from ip of my clients: 192.168.1.?.
How can i fix it? Because i do not want to permit access from some clients ips / filter in my firewall / proxy installed in 192.168.10.100 (gateway).
Thanks.
Hardware Version : Not Clear
Firmware Version : 0.9.1 0.11 v0032.0 Build 141117 Rel.54392n
ISP :
Hi!
When i set router with static ip address, by example:
ip: 192.168.10.1
Gateway: 192.168.10.100
Mask: 255.255.255.0
and set dhcp from stations in wireless / lan:
Lan: 192.168.1.1
Range DHCP: 192.168.1.2 - 192.168.1.254
Mask: 255.255.255.0
the ip source (source package) from request (192.168.1.?) to gateway (192.168.10.100) become with a source ip 192.192.10.1 (my wan ip), no from ip of my clients: 192.168.1.?.
How can i fix it? Because i do not want to permit access from some clients ips / filter in my firewall / proxy installed in 192.168.10.100 (gateway).
Thanks.