OC300 VIGI VLAN

OC300 VIGI VLAN

OC300 VIGI VLAN
OC300 VIGI VLAN
2 weeks ago
Model: OC300  
Hardware Version:
Firmware Version:

Es existiert ein VLAN 10.10.0.0/22

Die Kamera hat die Adresse 10.10.1.1.

Der Recorder hat die 10.10.0.80

Der Recorder findet nach dem Update die Kamera nicht mehr.

Recorder, Kamera und Switch wurden aktualisiert.

Der TP-Link-Support erklärt, daß sich beide Geräte nicht im Netzwerk befinden und sich daher nicht sehen können.

Hier hört mein Verständnis auf.

Der Recorder kann das Gataway erreichen. 10.10.0.1

Weiter geht es nicht.

Wo liegt das Problem?

Der OC 300 meldet, daß die Kamera und der Recorder verbunden sind.

  0      
  0      
#1
Options
5 Reply
Re:OC300 VIGI VLAN
2 weeks ago - last edited 2 weeks ago

Hi  @VolkerS 

 

Thanks for posting here.

So the situation here is that the cameras are not showing on the NVR's list?

Or how do you manage them?

 

The recorder can no longer find the camera after the update.

>>>What did you update? The NVR, the camera or the OC300?

 

Please share with us some screenshots indicating the situation. And please tell us how the situation is related with OC300.

 

Below is a guide about 

What Should I Do If I Cannot Control My VIGI Devices?

 

 

  0  
  0  
#2
Options
Re:OC300 VIGI VLAN
2 weeks ago

  @Vincent-TP 

Hallo,

 

ich denke, daß alle meine Probleme auf ein fehlendes/falsches Routing zurückzuführen sind.

Sehr lange Zugriffszeiten eines Clienten an den AP und gar kein Zugriff auf Gerät im VLAN.

 

Wie funktioniert das Routing im VLAN?

 

Hier ein Beispiel mit meinen Kameras und dem NVR 

 

1.

Gataway-> Switch(VLAN 107)-> NVR

Der NVR (10.7.0.60)kann die Kameras(10.7.1.6-8), die über einen EAP(im Mesh) eingebunden sind nicht erreichen.

traceroute endet am Gataway des VLAN(10.7.0.1)

 

2.

Gataway(VLAN 107)->NVR erreicht die Kameras direkt ohne das Gataway des VLANs(10.7.0.1)

Weshalb ist bei 1. ein Erreichen nicht möglich, wenn doch der Router 10.7.0.1 des VLANS(107) erreichbar ist?

Warum wird 10.7.0.1 bei Variante 2 "übergangen"?

 

 

 

  0  
  0  
#3
Options
Re:OC300 VIGI VLAN
a week ago

Hi  @VolkerS 

 

I need understand the situation first, otherwise I won't know what you are talking about.

So the situation here is that the cameras are not showing on the NVR's list?

Or how do you manage them?

 

Or you may contact your local hotline support for help, they will provide a real-time and step-by step help.

  0  
  0  
#4
Options
Re:OC300 VIGI VLAN
a week ago - last edited a week ago

 Hello @Vincent-TP 

 

Perhaps this picture illustrates my problem, which manifests itself optically in the cameras.

With the VIGI NVR2016H, the cameras are connected directly to the network.

 

With the VIVOTEK ND9542P,at another location, the cameras are integrated via RTSP.

 

When I log into a Wi-Fi network with my phone, I get a message saying the network is unstable. The camera recording stream confirms this.
Since the stream to the internal NVR also keeps interrupting, I suspect it's an internal problem.
It's understandable that nothing on the network can function properly with this kind of behavior.
What causes this kind of network behavior?

 

The hotline says this is a problem for the senior engineers. Unfortunately, I haven't received any feedback for months and am still in the dark.

I would really like a step-by-step guide for troubleshooting.

 

 

This is a normal NVR stream, on a different network that runs more discreetly.

 

 

 

  0  
  0  
#5
Options
Re:OC300 VIGI VLAN
a week ago - last edited a week ago

  @Vincent-TP 

 

hier noch die Topologie zur Kamera

 

 

 

 

 

File:
Topology (2).pngDownload
  0  
  0  
#6
Options