Home Network Community > Deco > Deco network goes down at nights
< Deco

Deco network goes down at nights

Deco network goes down at nights

Deco network goes down at nights
Deco network goes down at nights
2025-09-29 05:09:20 - last edited 2025-10-17 09:45:22
Model: Deco X1500  
Hardware Version: V5
Firmware Version: 1.3.0 build 29250725

I have. Starlink connection with Starlink router doing bridge and mail deco doing as router. 
 

some nights ago whole network started going down to red. I checked connect through Starlink app and the satellite is working fine but deco network is down (red). If I restart deco main unit it goes green again and starts working. I have a WiFi 6 mesh with 6 x1500 nodes and 2 x50 outdoor units. Any ideas ??? Don't know what to do. Thanks in adva

  1      
 
  1      
 
#1
Options
1 Accepted Solution
Re:Deco network goes down at nights -Solution
2025-09-29 12:00:32 - last edited 2025-10-17 09:45:22

  @Vendex it has been working fine for 6 months. Now it started failing at nights. All units last firmware version. It's worked well with all previous firmwares. 
 

Gonna exchange two of them and set the new one as main. 

Recommended Solution
  2  
  2  
#3
Options
2 Reply
Re:Deco network goes down at nights
2025-09-29 09:23:50
It looks like your main Deco X1500 is randomly losing the connection to Starlink, even though the Starlink app shows the satellite is fine. Since a reboot of the main Deco fixes it, it could be a software or compatibility issue. A few things you can try: Check firmware - Make sure all your Deco units (X1500 and X50 Outdoor) are on the latest firmware. Cable check - Replace the Ethernet cable between the Starlink router and your main Deco, just to rule that out. Change main Deco - Try setting another Deco as the main unit and see if the issue still happens. Connection type - In the Deco app, confirm that the Internet type is set correctly (usually Dynamic IP for Starlink). Bypass Starlink router - If you can, use the Starlink Ethernet adapter and connect your main Deco directly, skipping the Starlink router in bridge mode. This often improves stability
Think Red. Play Hard.
  1  
  1  
#2
Options
Re:Deco network goes down at nights -Solution
2025-09-29 12:00:32 - last edited 2025-10-17 09:45:22

  @Vendex it has been working fine for 6 months. Now it started failing at nights. All units last firmware version. It's worked well with all previous firmwares. 
 

Gonna exchange two of them and set the new one as main. 

Recommended Solution
  2  
  2  
#3
Options

Information

Helpful: 1

Views: 229

Replies: 2

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.