Business Community > Wireless > EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 11th Dec, 2025)
< Wireless

Early Access EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 11th Dec, 2025)

Early Access EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 11th Dec, 2025)

Early AccessEAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 11th Dec, 2025)
EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 11th Dec, 2025)
Monday - last edited 14 hours ago

This Article Applies To:

 

EAP772 V2, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP770 V2, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP772-outdoor V1, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP723 V1, Fully Adapted to Omada SDN Controller v6.1 or above;

EAP787 V1, Fully Adapted to Omada SDN Controller v6.1 or above;

 

Note

To update to this pre-release version, please make sure your device version is not lower than the version listed below:

EAP772 V2: 1.3.2 and above

EAP770 V2: 1.3.2 and above

EAP772-outdoor V1: 1.3.2 and above

EAP723 V1: 1.3.2 and above

EAP787 V1: 1.1.2 and above;

 

Download the EAP787 v1 1.1.2 from TP-Link official website first. If you can't find this version, download this version instead:

 

EAP787v1_1.1.2_[20251013-rel32717

 

Important note for EAP787 v1 1.1.2: This firmware upgrade is irreversible. Contact Omada technical support if a downgrade is required.

 

 

Release Notes:

New Feature/ Enhancement:

1. Optimized configuration synchronization mechanism.
2. Optimized automatic adoption.
3. Optimized ACS mechanism.
4. Optimized DFS switching mechanism and radar wave conflict handling.
5. Optimized automatic bandwidth selection mechanism.
6. Optimized background scanning mechanism.
7. Optimized VLAN implementation mechanism.
8. Optimized the Log reporting mechanism, adding logs related to DFS, CPU utilization, and more.
9. Optimized PPSK configuration process. Configuring a PPSK profile will only affect the modified entries.
10. Optimized FDB table management mechanism. 
11. Optimized CoA-ACK/NAK message cache mechanism.
12. Supported secure firmware download strategy.
13. Supported configuration of WPA3 Enterprise on the Standalone page.
14. Supported configuration of DNS adoption switch (Remote Adoption) on the Standalone page.
15. Modified the default security policy of SSIDs in factory state.
16. Modified the verification rules for static IP configuration items on the Standalone page.
17. Solved the problem of redirection and adoption failure of devices in the management state in the NAT scenario.
18. Solved the Blast-RADIUS security vulnerability and added a message-authenticator attribute verification switch.

 

Beta Firmware Download

 

Attention

 

Please be sure you have read the Beta Test Agreement before upgrading the Beta firmware!

 

 

 

EAP772 v2.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP770 v2.0_1.4.0_20251210-rel43868  (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP723 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP787 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)

 

 

 

EAP772 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP770 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP723 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP787 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)

 

 

Notes:

(1) Your device’s configuration won’t be lost after upgrading.

(2) The above firmware is fully adapted to Omada SDN Controller v6.1 and above

 

 

Update Log

 

11th Dec, 2025

 

1. Provide the link for EAP787 V1 1.1.2;

 

2. Update the pre-release version to the following version:

EAP772 v2.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP770 v2.0_1.4.0_20251210-rel43868  (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP723 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)
EAP787 v1.0_1.4.0_20251210-rel43868 (Pre-release Version)

 

 

 

8th Dec, 2025

Provide the pre-release link:

EAP772 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP770 v2.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP772-outdoor v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP723 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)
EAP787 v1.0_1.4.0_20251205-rel68459 (Pre-release Version)

 

 

Feedback

 

Any further feedback on the new firmware, please feel free to comment below or start a new thread from HERE.

To get better assistance, you may check Tips For Efficiently Reporting an Issue In The Community.

 

When reporting an issue, especially it's about a firmware upgrade, it's suggested to include the following info:

  • Management mode (Controller or Standalone)
  • Device Model(s) and Hardware
  • Device Firmware (previous and current)

 

Thank you in advance for your great cooperation and support.

 

Recommended Threads

 

Experience the Latest Omada EAP Firmware - Trial Available Here, Subscribe for Updates!

Current Available Solutions to Omada EAP Related Issues [Constantly Updated]

Get the Latest Omada SDN Controller Releases Here - Subscribe for Updates

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  1      
 
  1      
 
#1
Options
8 Reply
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 8th Dec, 2025)
Monday

  @Vincent-TP any updates on a updated EAP772 v1 firmware update?

  0  
  0  
#2
Options
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 8th Dec, 2025)
Yesterday

  @Vincent-TP My EAP787 is on the latest version I can find, 1.0.4. The listed upgrade isn't compatible.  

  0  
  0  
#3
Options
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 8th Dec, 2025)
Yesterday

  @Myanth 

 

You find yor software here.

 

https://support.omadanetworks.com/en/product/eap787/?resourceType=download

 

 

  0  
  0  
#4
Options
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 8th Dec, 2025)
23 hours ago

  @MR.S That's for the EU version. I'm in the US. https://support.omadanetworks.com/us/product/eap787/v1/?resourceType=download

  0  
  0  
#5
Options
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 8th Dec, 2025)
14 hours ago - last edited 14 hours ago

Hi  @Myanth 

 

Thanks for the feedback. Updated.

 

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#6
Options
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 8th Dec, 2025)
14 hours ago

Hi  @Bohdans 

 

It won't be long, maybe by the end of this month.

 

Note: ETA is provisional, and actual delivery may vary depending on implementation conditions.

Bohdans wrote

  @Vincent-TP any updates on a updated EAP772 v1 firmware update?

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#7
Options
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 11th Dec, 2025)
12 hours ago - last edited 12 hours ago

  @Vincent-TP so the 773 is just going to continue to be ignored? It got removed from the previous beta post, and you continue to ignore questions about it.,

 

Also the 772-Outdoor Update is also irreversible, At least based on 1.3.5's release notes, unless somehow you can magically skip it, and make it not irreversible. Or at least it should be noted that it wouldn't be irreversible beyond or below 1.3.5. which seemingly still isn't "stable" yet either.

Site 1: EAP773 X2 EAP772-Outdoor EAP650-Desktop Site 2: EAP660HD x2
  0  
  0  
#8
Options
Re:EAP7xx v1.4.0 Fully Adapted to Omada 6.1 Pre-release Firmware (Update on 11th Dec, 2025)
10 hours ago

Hi  @Napsterbater

 

I’m really sorry, I didn’t mean to ignore your question on purpose. It’s just that I didn’t have the answer at the time you asked me.

 

EAP773 is due to be updated at the same time as EAP772 V1. I appreciate your understanding.

Napsterbater wrote

  @Vincent-TP so the 773 is just going to continue to be ignored? It got removed from the previous beta post, and you continue to ignore questions about it.,

 

Also the 772-Outdoor Update is also irreversible, At least based on 1.3.5's release notes, unless somehow you can magically skip it, and make it not irreversible. Or at least it should be noted that it wouldn't be irreversible beyond or below 1.3.5. which seemingly still isn't "stable" yet either.

 

Wish you a happy life and smooth network usage!  >Omada US Enterprise Beta Program Launch< >Get the Latest Omada SDN Controller Releases Here< >Experience the Latest Omada EAP Firmware<
  0  
  0  
#9
Options

Information

Helpful: 1

Views: 502

Replies: 8

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.