How to disable Client-Mac-Adress changes on TL-WA850RE V2.0?

How to disable Client-Mac-Adress changes on TL-WA850RE V2.0?
How to disable Client-Mac-Adress changes on TL-WA850RE V2.0?
2016-02-01 20:30:03
Model : TL-WA830RE

Hardware Version : V2

Firmware Version : 1.0.0 Build 20151228 Rel. 63247

ISP :

Hello.

I'm using a TL-WA850RE V2.0 (1.0.0 Build 20151228 Rel. 63247) to extend my WiFi.


I found out, that any device who try to get a ip over this extender, have a manipulated MAC beginning with 62:e3:.......


The problem are, I using DHCP to give all devices in my network a fixed IP.

The fixed IPs are needed to access some ports from LAN and WAN. (FTP, SCP, Web and so on).

Now I need often to change my IP in my FTP-Client. Somestimes a device switch between the networks and I need to restart this filetransfer with the other IP again. :mad:


I use also a TP-Link TL-WR841N to extend the network in an other area. But there are no MAC-address-changes.


How I can disable this curious and stressful behavior?


PS:
All my SSIDs are different. My (very sentient) WiFI-Radio (dnt ipdio) fail always, if I try to connect with any TP-AP. Very courios.
0
0
#1
Options
1 Reply
Re:How to disable Client-Mac-Adress changes on TL-WA850RE V2.0?
2016-02-03 16:58:23
You can assign the devices connected to 850RE according to the virtual MAC. Just use it to replace the real mac of these devices.
0
0
#2
Options