Business Community > Gateways > ER605 V2 2.3.0 to 2.3.3 firmware upgrade fails
< Gateways

ER605 V2 2.3.0 to 2.3.3 firmware upgrade fails

ER605 V2 2.3.0 to 2.3.3 firmware upgrade fails

ER605 V2 2.3.0 to 2.3.3 firmware upgrade fails
ER605 V2 2.3.0 to 2.3.3 firmware upgrade fails
Yesterday - last edited 9 hours ago
Tags: #Firmware Update
Model: ER605 (TL-R605)  
Hardware Version: V2
Firmware Version: 2.3.0

Hi,

 

Went to upgrade my ER605 V2 from 2.3.0 to 2.3.3 and it failed.

Checked a thread on this forum and it mentioned to go to 2.3.2 first. This appeared to fail, but router says 2.3.2 is current version.

 

Try a rollback and see this " This model in the selected site has already specified a firmware version. "

 

Then as it appears 2.3.2 is the current, attempted an upgrade to 2.3.3.  Fails with " This model in the selected site has already specified a firmware version. "

 

No idea where to go from here.  How do I get to 2.3.3 ??

 

  0      
 
  0      
 
#1
Options
2 Reply
Re:ER605 V2 2.3.0 to 2.3.3 firmware upgrade fails
3 hours ago

 Hi @Zathras 

Thanks for posting in our business forum.

May I know if you manage this ER605 via Omada Controller? What is the version of your Controller?

Can you check the current firmware version of ER605 at Devices page?

How did you update the ER605? In the same local network or remotely?

It would be much appreciated if you can provide us with any screenshot of the error when you tried to update the firmware to 2.3.3.

Best Regards! >> Omada EAP Firmware Trial Available Here << >> Get the Latest Omada SDN Controller Releases Here << *Try filtering posts on each forum by Label of [Early Access]*
  0  
  0  
#2
Options
Re:ER605 V2 2.3.0 to 2.3.3 firmware upgrade fails
2 hours ago

 Hi @Hank21 

 

OC-200 Controller 2.0 - 6.1.0.19 - 2.23.10 Build 20260117 Rel.60507

ER605 2.0 -  2.3.2 Build 20251029 Rel.12727

 

Yes, the ER605 was updated locally via Omada Controller web UI.  ER605, OC-200 & PC all on same network.

 

 

The red '1' just points to the Falied Device list.

 

 

Logging into the controller, the new firmware notice pops up, indicating ER605 v2.3.3 is available.

Try to upgrade and this error pops up:

 

Release note says " Only the firmware version number and signature algorithm are different from version 2.3.2 Build 20251029 Rel.12727. "

I guess that's why it doesn't want to go to v2.3.3 ?

 

 

  0  
  0  
#3
Options

Information

Helpful: 0

Views: 52

Replies: 2

Tags

Firmware Update
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.