@ddarjo What are you trying to do?  These units almost always work in pairs to form a bridge to bring network connection across long distances.  Even though you can program one to be be an access point, it's only 5g, and they were never intended for this purpose.  To do what I think you want, you will need another 710 connected to your router directly and set up in "access point" mode.  This access point mode is so that other 5g cpe bridge devices can connect (bridge) to it.  Then your other one is set to "client" mode.  As long as there's a decent enough line of sight, you will then see the 710 that has been placed in access point mode.

 

There are a lot of videos out there that can help you through the setup.

currently I have in use for this purpose ubiquiti loco m2. I catch from outside free open public wifi then lan to home router and then wirelessly in room. CPE710 has stronger antena so I want to do same with it. Works like client where catches outside wifi signal and then poe-lan-router-wifi inside. CPE710 in Survey can not find any network around - I tried with home router, two phones (MAX 13 PRO , S23 Ultra).