Business CommunityControllersCan't edit existing SD-WAN on Omada 6.2
Controllers

Can't edit existing SD-WAN on Omada 6.2

Can't edit existing SD-WAN on Omada 6.2

Can't edit existing SD-WAN on Omada 6.2
Can't edit existing SD-WAN on Omada 6.2
2 weeks ago - last edited a week ago
Model: OC300  
Hardware Version: V1
Firmware Version: 1.33.10 Build 20260408 Rel.53393

After updating my OC300 to 6.2 firmware (1.33.10 Build 20260408 Rel.53393) I gen error "A LAN network segment without a mapped address may conflict with the IP pools of the WAN, Virtual WAN, or VPN." when I try to edit existing SD-WAN. I've added another WAN connection on my "hub" router and I would like to switch SD-WAN to it. It has public IP so there shouldn't be a problem changing SD-WAN to that WAN and I can select it when editing SD-WAN group. If I try to change it I get this error. Even if I just open SD-WAN Group that I have and don't change anything, I still get this error.

 

I have 1 ER7206 v2 with 6.2 firmware (2.3.1) and 2 ER8411 with 1.3.6 firmware (adapted to 6.0 or 6.1?)

 

Anyone else experiencing this?

0
0
#1
1 Accepted Solution
Re:Can't edit existing SD-WAN on Omada 6.2-Solution
a week ago - last edited a week ago

  @Vincent-TP 

 

Thank you for your reply. I changed VPN subnets and now it's working. It's strange that same VPN subnets weren't problem when setting up SD-WAN on previous Omada versions.

Recommended Solution
0
0
#3
3 Reply
Re:Can't edit existing SD-WAN on Omada 6.2
a week ago

Hi  @NeoCZ 

 

Thanks for posting here.

If conflicts with the WAN or virtual WAN can be ruled out, please check for a conflict with the VPN subnet.

 

Alternatively, you can take screenshots of your VPN configuration and LAN configuration interfaces, and we will help you review them. 

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Get the Latest Firmware Releases for Omada Routers Here< >Experience the Latest Omada EAP Firmware<
0
0
#2
Re:Can't edit existing SD-WAN on Omada 6.2-Solution
a week ago - last edited a week ago

  @Vincent-TP 

 

Thank you for your reply. I changed VPN subnets and now it's working. It's strange that same VPN subnets weren't problem when setting up SD-WAN on previous Omada versions.

Recommended Solution
0
0
#3
Re:Can't edit existing SD-WAN on Omada 6.2
a week ago

Hi  @NeoCZ 

 

Thanks for the feedback, and glad to hear that the issue has been resolved.

 

In previous firmware versions, SD-WAN traffic distribution might have relied more on routing policies or load balancing algorithms themselves. However, starting with this version, Omada has enhanced its logic to require that, for each LAN subnet that needs to use SD-WAN, its primary WAN link be explicitly specified. This is to ensure deterministic traffic paths and avoid loop conflicts.

Wish you a happy life and smooth network usage!  >Get the Latest Omada SDN Controller Releases Here< >Get the Latest Firmware Releases for Omada Routers Here< >Experience the Latest Omada EAP Firmware<
0
0
#4

Information

Helpful: 0

Views: 345

Replies: 3

About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.