Hi all,
Recently I bought 3x Deco BE65 and replaced my old router. With my previous router I was using wake on lan in my home network (only locally), but it stopped working after switching to Deco. I don't see any features on my Deco app regarding turning the Wol. Even if I log in on the browser the advanced settings are limited.
Does Deco support wake on lan? If so how to enable it?
Important Notes:
1. This feature requires Deco firmware support. If you don't see this feature in the Deco app, your Deco's firmware may not currently support it yet. Please check for firmware updates in the Deco app.
2. WoL only works for wired devices (including devices directly attached to the Deco or through a switch). It cannot be used for Wi-Fi devices.
How to Use Wake-on-LAN on Deco:
1. Prepare Your Computer:
• Check the BIOS/UEFI settings: Verify the motherboard supplies power to the network adapter when the computer is off by checking if network port lights are on.
• Configure power management: Ensure both "Allow the computer to turn off this device to save power" and "Allow this device to wake the computer" are checked in Power management.
• Configure network adapter WoL settings: Enable "Shutdown Wake-On-Lan", "Wake on Magic Packet", and "Wake on pattern match" in the network adapter's Properties.
2. Use the Deco App:
• Open the Deco app, go to More > Advanced Settings > WoL, tap the "+" icon to add WoL devices.
• In the WoL device list, click the "Alarm" icon to send the wake-up signal to the specified device.
For detailed instructions, you can refer to: https://www.tp-link.com/support/faq/4532/
Helpful: 0
Views: 91
Replies: 1
No one has voted for it yet.
We use cookies and browser activity to improve your experience, personalize content and ads, and analyze how our sites are used. For more details, please read our Privacy Policy.
