Archer C9 with ONT
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C9 with ONT
Model :
Hardware Version : Not Clear
Firmware Version :
ISP :
Dears
For you to better understand what I need to do with the C9:
1) Today: I have the hardware bellow to have fixed internet optical broadband:
Fiber Optic + ONT (optical network terminal, Blu-Castle, model BC-ONT1B) + Rooter (Coletek, model W-M2120N)
- The ONT [COLOR=#000000]is prepared with Vlan 10=Internet and Vlan 20 = TV. In this momento I dont have TV service, only internet.
[COLOR=#000000] - The rooter Coletek is very limited
[COLOR=#000000]
[COLOR=#000000]2) My wish:
Fiber Optic + ONT (optical network terminal, Blu-Castle, model BC-ONT1B) + TP-Link Archer C9 v.2.[COLOR=#000000]
- T[COLOR=#000000]his way I eliminate the current router
[COLOR=#000000]
[COLOR=#000000]I know that the original firmware on Archer C9 v2 does not allow direct set up the VLAN.
[COLOR=#000000]I know there are firmware (like DD-WRT or OpenWRT) that allow it. I do not know if they has a firmware correct for Archer C9 v.2. and if to do this is safe.
[COLOR=#000000]
[COLOR=#000000]In your opinion:
[COLOR=#000000]a) The WAN port on Archer C9 v2 and firmware on board, Is it able to accept internet with Vlan 10?
[COLOR=#000000]b) The WAN port on Archer C9 v2 and firmware on board, Is it able to accept TV with Vlan 20?
c) What should I do to remove the current root (Coletek) and put only the C9 v.2?
[COLOR=#000000]Thanks very much.
Hardware Version : Not Clear
Firmware Version :
ISP :
Dears
For you to better understand what I need to do with the C9:
1) Today: I have the hardware bellow to have fixed internet optical broadband:
Fiber Optic + ONT (optical network terminal, Blu-Castle, model BC-ONT1B) + Rooter (Coletek, model W-M2120N)
- The ONT [COLOR=#000000]is prepared with Vlan 10=Internet and Vlan 20 = TV. In this momento I dont have TV service, only internet.
[COLOR=#000000] - The rooter Coletek is very limited
[COLOR=#000000]
[COLOR=#000000]2) My wish:
Fiber Optic + ONT (optical network terminal, Blu-Castle, model BC-ONT1B) + TP-Link Archer C9 v.2.[COLOR=#000000]
- T[COLOR=#000000]his way I eliminate the current router
[COLOR=#000000]
[COLOR=#000000]I know that the original firmware on Archer C9 v2 does not allow direct set up the VLAN.
[COLOR=#000000]I know there are firmware (like DD-WRT or OpenWRT) that allow it. I do not know if they has a firmware correct for Archer C9 v.2. and if to do this is safe.
[COLOR=#000000]
[COLOR=#000000]In your opinion:
[COLOR=#000000]a) The WAN port on Archer C9 v2 and firmware on board, Is it able to accept internet with Vlan 10?
[COLOR=#000000]b) The WAN port on Archer C9 v2 and firmware on board, Is it able to accept TV with Vlan 20?
c) What should I do to remove the current root (Coletek) and put only the C9 v.2?
[COLOR=#000000]Thanks very much.