Eogre Tunnel
hello everybody,
i am trying to set up an EOGRE tunnel between an Omada Eap (site 1) and a raspberry pi (site 2). Does anyone know of a good beginner-friendly guide or tutorial?
My goal is to terminate the EOGRE tunnel on the raspberry pi(site one) and bridge the traffic to my SSID (layer 2) (site2) with eap 610 outdoor v1 and 615wall v1
does anyone if EAP 615 wall V1 is compatible with this tunnel?
many thanks in advance
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Hi @prisko
Thanks for posting here.
Here is a guide about configuring SSID with EoGRE:
How to set up an SSID with EoGRE Tunnel using Omada EAP
EAPs compatible with Omada Network V6.0 support this feature.
EAP615-wall V1 hasn't released a firmware adapted to Omada v6.0 yet, but EAP610-outdoor has.
- Copy Link
- Report Inappropriate Content
Hi @prisko
Thanks for posting here.
Here is a guide about configuring SSID with EoGRE:
How to set up an SSID with EoGRE Tunnel using Omada EAP
EAPs compatible with Omada Network V6.0 support this feature.
EAP615-wall V1 hasn't released a firmware adapted to Omada v6.0 yet, but EAP610-outdoor has.
- Copy Link
- Report Inappropriate Content
I have found this oficial manual: https://support.omadanetworks.com/br/document/117650/
But i can´t have turn on the tunel. Do you know another manual like this? Your suggestion is good but the problem is i need configure it with linux. thank you so much.
The new firmaware eap 615 wall is going to be launched?
- Copy Link
- Report Inappropriate Content
Hi @prisko
Do you use the Omada controller? You can install an Omada controller on your Linux system and configure it via the web interface.
https://support.omadanetworks.com/en/product/omada-software-controller/?resourceType=download
prisko wrote
I have found this oficial manual: https://support.omadanetworks.com/br/document/117650/
But i can´t have turn on the tunel. Do you know another manual like this? Your suggestion is good but the problem is i need configure it with linux. thank you so much.
The new firmaware eap 615 wall is going to be launched?
>>>Unfortunately, the community team won't have this info. You may pay attention to the official website.
- Copy Link
- Report Inappropriate Content
I´m using oc200 with 2.25.18 Build 20260506 Rel.74187 (Estable).
Is it necessary to install omada on Linux for the eogre tunnel to work?
- Copy Link
- Report Inappropriate Content
Hi @prisko
OC200 is fine.
We don't have a guide specific to Linux. But you can log into its web interface and follow the guide to configure the eogre tunnel.
prisko wrote
I´m using oc200 with 2.25.18 Build 20260506 Rel.74187 (Estable).
Is it necessary to install omada on Linux for the eogre tunnel to work?
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 272
Replies: 5
Voters 0
No one has voted for it yet.