Huge lag when using ethernet client

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Huge lag when using ethernet client
Huge lag when using ethernet client
2016-05-04 20:08:34
Model : TL-WR702N

Hardware Version : V1

Firmware Version : 4.19.101 Build 160302 Rel.59339n

ISP :

I get huge latency when using the TL-WR702N in client mode. It also happens in repeater and bridge mode when something is connected to the LAN port. It seems fine when nothing is connected to the LAN port.

Pinging 192.168.1.1 with 64 bytes of data:

Reply from 192.168.1.1: bytes=64 time=1 TTL=255 seq=1
Reply from 192.168.1.1: bytes=64 time=1 TTL=255 seq=2
Reply from 192.168.1.1: bytes=64 time=1 TTL=255 seq=3
Reply from 192.168.1.1: bytes=64 time=304 TTL=255 seq=4
Reply from 192.168.1.1: bytes=64 time=1376 TTL=255 seq=5
Reply from 192.168.1.1: bytes=64 time=1168 TTL=255 seq=6
Reply from 192.168.1.1: bytes=64 time=1 TTL=255 seq=7
Reply from 192.168.1.1: bytes=64 time=1 TTL=255 seq=8

Ping statistics for 192.168.1.1
Packets: Sent = 8, Received = 8, Lost = 0 (0% loss),
Approximate round trip times in milliseconds:
Minimum = 1, Maximum = 1376, Average = 356


This lag makes browsing slow and no good at all for gaming. The only way round this I have found is to disable 11n by setting the mode to 11bg mixed. The only thing is this can only be done in bridge mode. There's no option in client and repeater mode. Does anyone else have this lag problem and is there a better solution?
0
0
#1
Options