TL-ANT2412D Antenna use on Tplink Archer C7

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

TL-ANT2412D Antenna use on Tplink Archer C7

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
TL-ANT2412D Antenna use on Tplink Archer C7
TL-ANT2412D Antenna use on Tplink Archer C7
2016-08-25 08:09:02
Model :

Hardware Version :

Firmware Version :

ISP :

Antenna Model: TL-ANT2412D 2.4ghz 12dbi omni directional antenna with pigtail cable TL-ANT24PT3

Router : Tp-link TL-WR841ND

Setup application : Indoor use

Hi,

Im planning to use the 2pcs Tp-link TL-ANT2412D 2.4ghz to replace the two 5dbi detachable antennas on my Tp-link TL-WR841ND router to extend wifi signal range inside our home
the router is currently place on the basement floor , will changing the antenna to the 2pcs 12dbi outdoor antennas increase its range to the second and third floor indoor.
With the stock 2pcs 5dbi antenna that came with the router signal is good on the basement and 1st floor but on the second floor signal has bad quality

currently with my testing the signal seems to be the same with the stock 5dbi antennas.
  0      
  0      
#1
Options
2 Reply
Re:TL-ANT2412D Antenna use on Tplink Archer C7
2016-08-29 17:22:45
An omni-directional antenna can focus the signal in a plane, its signal coverage is a plate, so the signal is weak in other floors. You can properly adjust the angle of the antenna, so that the signal can be transmitted to other floors.
  0  
  0  
#3
Options
TL ANT2412D Antenna use on Tplink Archer C7
2016-11-13 13:17:29
if it replaced my antenna then and added that filter would the wiring in my car for the antenna work with a CB radio or would I need to replace the cable to the antenna?
  0  
  0  
#4
Options

Information

Helpful: 0

Views: 595

Replies: 2