Home Network Community > Wi-Fi Routers > Archer C20 is not connect automatically to the Internet
< Wi-Fi Routers

Archer C20 is not connect automatically to the Internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C20 is not connect automatically to the Internet

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C20 is not connect automatically to the Internet
Archer C20 is not connect automatically to the Internet
2017-01-13 17:24:21
Model :

Hardware Version :

Firmware Version :

ISP :

Archer C20 is not connected to the Internet

After switching on /restarting WiFI router does not have internet access.. For internet access, every time I should click on Disconnect button and then Connect button from WAN setting. Internet access never connect directly without these process.. It is very irritating to do again and again when no internet access...

Firmware Version:0.9.1 2.1 v0044.0 Build 151120 Rel.35051n

[B]Hardware Version:Archer C20 v1 00000000

[/B]
Model : Archer C20
  1      
 
  1      
 
#1
Options
9 Reply
Re:Archer C20 is not connect automatically to the Internet
2017-01-17 09:50:35
Check with the following setting for WAN -

Secondary Connection - Disabled
Connection Mode - Always On
Max Idle Time - 0
Authentication Type - AUTO_AUTH

Regards.
  0  
  0  
#2
Options
Re:Archer C20 is not connect automatically to the Internet
2017-01-17 17:57:46
May I know your internet connection type? Is it Dynamic IP or PPPoE? How often does it drop the internet?
As for the Connection Mode, you can select On Demand and set the value as 0.
  0  
  0  
#3
Options
Re:Archer C20 is not connect automatically to the Internet
2017-01-17 20:32:48

radhx wrote

Check with the following setting for WAN -

Secondary Connection - Disabled
Connection Mode - Always On
Max Idle Time - 0
Authentication Type - AUTO_AUTH

Regards.


We can't able to change Max Ideal Time as 0 when Connection Mode as "Always On". So, I made connection Mode as "Manual" and then change the value of Max Ideal as 0 then after I am facing same problem....
  0  
  0  
#4
Options
Re:Archer C20 is not connect automatically to the Internet
2017-01-17 20:40:06

tplink wrote

May I know your internet connection type? Is it Dynamic IP or PPPoE? How often does it drop the internet?
As for the Connection Mode, you can select On Demand and set the value as 0.


Connection type: PPPoE
I have changed Connection Mode as "On Demand" as well as set the value as 0 after that also it is not helping out me. :(
Before I used Digisol single anteena router and it is working fine.

The service provider that is Net9online by Hathwat said that in TP-Link dual band having some problem . Problem means - either you are switched off the router or restart the router you should goes to setting and click on "Connect" button everytime.. Please help me for this issue..
  2  
  2  
#5
Options
Re:Archer C20 is not connect automatically to the Internet
2017-01-19 13:44:09
The same problem and on Archer C 20 i.
  2  
  2  
#6
Options
Re:Archer C20 is not connect automatically to the Internet
2017-08-21 21:22:53
configured WAN setting as per below and reboot the router and check.
Secondary Connection - Disabled
Connection Mode - Connect on demand
Max Idle Time - 0
Authentication Type - AUTO_AUTH

+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

if the above setting haven't resolved the issue then upgrade the firmware and reboot the router
click the below url to download the firmware.
https://drive.google.com/open?id=0B88FTY6zbUGUSGFjZURlLTgyVVU
  4  
  4  
#7
Options
Re:Archer C20 is not connect automatically to the Internet
2020-01-12 09:17:31 - last edited 2020-01-12 09:24:49

Resolved !!

Finally, I am relieved of connecting and disconnecting the router manually from the WAN section.

 

Steps to Resolve:

 

1. Download the new firmware from the link provided by @kk99226 and upgrade the router firmware. ( Please read the firmware upgrade steps and notes from the official docs before upgrading )

 

 

2. Perform these steps:

  Secondary Connection - Disabled
  Connection Mode - Connect on demand
  Max Idle Time - 0
  Authentication Type - AUTO_AUTH

 

 

3. Reboot/Restart the router and that's it.

 

 

Now the router would connect to the internet automatically on every boot.

 

[  Warning: After upgrading the firmware the router was out of configuration ie  The router was completely factory reset and I had to manually re-configure it again  ]

 

 

 

Don't repeat the dumbness, get smart.
  1  
  1  
#9
Options
Re:Archer C20 is not connect automatically to the Internet
2021-06-24 19:49:40

@kk99226 

The drive link is not working. Can you look into this if possible? 
I am having the exact same problem even if I have exchanged it twice ! 

  1  
  1  
#10
Options
Re:Archer C20 is not connect automatically to the Internet
2021-08-10 03:25:42
Hi @kk99226, The link you provided is not working. Can you please reshare it? I have been facing the same issue of auto-connect, even after I changed my settings as below: Secondary Connection - Disabled Connection Mode - Connect on demand Max Idle Time - 0 Authentication Type - AUTO_AUTH
  1  
  1  
#11
Options

Information

Helpful: 1

Views: 4112

Replies: 9

Related Articles
 archer c20 not connecting automatically after connection drop
410 0
My Archer C20 does not want to connect as a range extender
704 0
DNSCrypt for Archer C20
1431 0
 Archer C20 not able to connect UniFi
1146 0
Wifi drops on Archer C20
1113 0
Archer C20 AC750 firmware
3183 2
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.