Home Network Community > Wi-Fi Routers > Archer C1200, no wired clients connecting.
< Wi-Fi Routers

Archer C1200, no wired clients connecting.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C1200, no wired clients connecting.

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C1200, no wired clients connecting.
Archer C1200, no wired clients connecting.
2017-02-14 19:28:52
Model :

Hardware Version :

Firmware Version :

ISP :

My wired clients can't connect to router. One desktop, one dreambox (reserved 192.168.1.5) and one printer (at 192.168.1.100).
Leds are lit for each connector at both ends.
Changed router, cause the old one break down. I have settings as attached picture. And clients are pointing to the router.
This settings worked fin with the old Netgear router.




Thanks for help
  0      
 
  0      
 
#1
Options
8 Reply
Re:Archer C1200, no wired clients connecting.
2017-02-15 13:47:40
Please check the clients' settings. Make sure they obtain the IP automatically.



  0  
  0  
#2
Options
Re:Archer C1200, no wired clients connecting.
2017-02-16 03:03:35
DHCP is activated for every client in the network. And was also before to the old router.
No client can connect by ethernet only wifi.:-(
  0  
  0  
#3
Options
Re:Archer C1200, no wired clients connecting.
2017-02-16 08:56:11

r17tsi wrote

DHCP is activated for every client in the network. And was also before to the old router.
No client can connect by ethernet only wifi.:-(


Have you tried to reboot the router?
In addition, do you switch any feature such as IPTV, parental control, etc?
Try to make a ping test between the router and the clients.
  0  
  0  
#4
Options
Re:Archer C1200, no wired clients connecting.
2017-02-17 04:05:48
Yes, rebooted the router.
No IPTV, parent control is on.
Ping = time out . . .
My printer have IP 192.168.1.100, and dreambox 192.168.1.5, and no answer with ping.
  0  
  0  
#5
Options
Re:Archer C1200, no wired clients connecting.
2017-02-17 09:01:01

r17tsi wrote

Yes, rebooted the router.
No IPTV, parent control is on.
Ping = time out . . .
My printer have IP 192.168.1.100, and dreambox 192.168.1.5, and no answer with ping.


And the wireless clients could get internet as normal? Then it seems too strange.
How do you connect your network devices in your home? For example, Internet ---- modem ---- C1200 ----- wired clients.
It's recommended to reset the router to factory defaults for a check.
  0  
  0  
#6
Options
Re:Archer C1200, no wired clients connecting.
2018-02-21 02:47:10
I have the same problem and I don't know what I can do. I have restored the factory configuration and the wired connections doesn't work.

I put image of the current configuration with the firmware version


  0  
  0  
#8
Options
Re:Archer C1200, no wired clients connecting.
2018-02-21 02:53:08
I have the same problem and I don't know what I can do.
I have restored with the factory configuration and the wired connections doesn't work
I put image of the current configuration with the firmware version.



  0  
  0  
#9
Options
Re:Archer C1200, no wired clients connecting.
2018-02-21 03:06:40
I have solved the problem. I had a switch connected with two ports to the router, by removing one of them, all wired connections work perfectly.
  2  
  2  
#10
Options

Information

Helpful: 0

Views: 3445

Replies: 8

Related Articles
 tp-link archer c1200 doesn't recognzed wired clients
2037 0
No wired Clients
980 0
 Archer C1200 not connecting to internet
960 0
 Archer C1200 wired LAN speed decay
1141 0
 Archer C2600 "forgets" wired clients
847 0
Router loses connection on wired connections, Wi-Fi clients are okay
494 0
About Us
Press
Copyright © TP-Link Systems Inc. All rights reserved.