AD7200 Access point Only (again)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

AD7200 Access point Only (again)

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
AD7200 Access point Only (again)
AD7200 Access point Only (again)
2017-07-17 17:32:11
Model :

Hardware Version :

Firmware Version :

ISP :

Hello form France
My network is on 192.168.0.xxx
I have plug my AD7200 on a lan port (not wan) and disable DHCP to be on the same network. It works
I have also put an static IP on my AD7200 192.168.0.2 (my box in 192.168.0.1
when i scan my network, i found my AD7200 on 192.168.0.53 and impossible now to reach it on any browser
Of course, i have no other device on 192.168.0.2

The only solution that i found to reach it again is to plug it on wan port and enable DHCP, but after i have 2 different network (and i don't want)

Do you have any ideas ?
Really thanks for your help
File:
Internet.PNGDownload
  0      
  0      
#1
Options
2 Reply
Re:AD7200 Access point Only (again)
2017-07-21 14:34:30
change it wan to static ip 10.0.0.1 then change its lan ip to 192.168.0.252, later disable DHCP. last connect cable from main router to lan 1 of AD7200.
  0  
  0  
#2
Options
Re:AD7200 Access point Only (again)
2017-07-22 01:06:56
Thanks for your help
I have made changement: WAN IP 192.168.1.1 -> 10.0.0.1 in lan option ( i don't have a Wan menu)
Maybe i'm wrong
and 192.168.0.2 -> 192.168.0.252 and disable DHCP
No improvement, i's still working but now when i scan my network, my AD7200 has disapear :rolleyes:

I'm lost...... The last picture is Internet option.
I need to change something in this menu ? (except 192.168.0.2 -> 192.168.0.252 ), Gateway, mask, dns also ?

In conclusion, could you be more clear please.... Really thanks
  0  
  0  
#3
Options