How to resolve common problems when setting up the Kasa smart device (Plug/Bulb)
Our Kasa app is designed to provide a easy step by step process to set up your new smart device. However, there may be instances where issues come up during the installtion. This guide will try and provide steps to try in order to resolve your issue.
- Go into the “Settings > Wi-Fi” menu of your smart phone, manually connect to the smart devices network. Open Kasa and select the option that you are manually connected to the smart device located on the bottom of the set up screen
- Make certain you choose the correct smart device to connect to. The last four characters of the MAC address are also apart of the network name of the smart device.
- Disable any VPN connection that you phone may be using during the setup.
- Perform a factory default on the smart device and repeat the process.
- Make sure the smart device is not connecting back to your home Wi-Fi network. If so, connect back to the TP-Link Wi-Fi network.
- Reinstall the Kasa app on your smart phone.
- When on the screen where you join the smart device to the network. The wireless network name you see above the wireless password box should be the one you normally connect to in order to receive internet, if not, select the link below to choose a different network name.
- The wireless signal should be at least two bars, if it is one bar, move the device closer for setup.
- If the router’s SSID is hidden, please choose “manually setup my Wi-Fi” to input SSID and password.
- Wait 15 seconds then check LED status. If the smart devices LED indicates it is connected to the network or if the bulb blinks several times, do not select the option to start over. Sign out and back into the Kasa app and wait a few minutes to see whether the device is working.
- Check to see if your phone is now connected back to your home Wi-Fi. If not, connect back, and go back to Kasa.
- Verify that the wireless password being used is correct. Going into your phones Settings > Wi-Fi menu. Forget the wireless network that you are trying to connect the smart device to, and then reconnect. When the phone asks for the wireless password, use the same password that you tried in Kasa. Delete the password that exists in the box and enter the wireless password for your network again.