How to configure 802.1Q VLAN on Smart and Managed switches using the new GUI?

VLAN (Virtual Local Area Network) is a technology that can solve broadcasting issues. A LAN can be divided into several VLANs logically, and only the hosts in a same VLAN can communicate with each other.

Here is a configuration example for 802.1Q VLAN.

Network Topology:

Network Requirement:

• Hosts in the same department can communicate with each other.
• Hosts in different departments cannot communicate with each other.
• Both department A and department B can visit the FTP server.

Configuration Scheme:

• Create VLAN 10 and VLAN 20 for department A and department B respectively.
• Create VLAN 30 for the FTP server, and add the hosts in department A and department B to VLAN 30.
• Configure PVIDs for ports. With correct PVID settings, both department A and department B can visit the FTP server, but cannot communicate with each other.

VLAN Configurations on Switch 1 and Switch 2:

	VLAN 10	VLAN 20	VLAN 30
Switch 1	Port 1-2	Port 1, 3	Port 1-3
Switch 2	Port 1-2, 4	Port 1, 3-4	Port 1-4

Egress Rule and PVID settings for Switch 1 and Switch 2:

Switch	Switch 1			Switch 2
Port	1	2	3	1	2	3	4
Egress Rule	Tagged	Untagged	Untagged	Tagged	Untagged	Untagged	Untagged
PVID	1	10	20	1	10	20	30

Configurations on Switch 1:

Step 1

Go to L2 Features > VLAN > 802.1Q VLAN > VLAN Config, create VLAN 10, VLAN 20 and VLAN 30; add Untagged port 2 and Tagged port 1 to VLAN 10; add Untagged port 3 and Tagged port 1 to VLAN 20; add Untagged port 2-3 to VLAN 30 and Tagged port 1 to VLAN 30.

Step 2

Go to L2 Features > VLAN > 802.1Q VLAN > Port Config, set the PVID value as 1, 10, 20 for port 1, port 2 and port 3 respectively.

Configurations on Switch 2:

Step 1

Go to L2 Features > VLAN > 802.1Q VLAN > VLAN Config, create VLAN 10, VLAN 20 and VLAN 30; add Untagged port 2, Untagged port 4 and Tagged port 1 to VLAN 10; add Untagged port 3, Untagged port 4 and Tagged port 1 to VLAN 20; add Untagged port 2-4 to VLAN 30 and Tagged port 1 to VLAN 30.

Step 2

Go to L2 Features > VLAN > 802.1Q VLAN > Port Config, set the PVID value as 1, 10, 20 and 30 for port 1, port 2, port 3 and port 4 respectively.