Home Network Community >
All Threads >
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
2017-10-17 11:29:42
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-17 11:29:42
Tags:
Dear All,
On October 16th, 2017, an security researcher has disclosed some severe flaws in the WPA2 security protocol.
Description of the vulnerability
The vulnerability that known as "KRACK", short for Key Reinstallation Attack, will target the four-way handshake of the WPA2 protocol. Mathy Vanhoef, who published the flaw, said that the flaw may allow an attacker within the Wi-Fi range to decrypt network traffic from a WPA2-enabled device, hijack connections, and inject content into the traffic stream.
The publisher also points out that, the main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates.
For more details, please refer to the below article published by Vanhoef:
https://www.krackattacks.com/
The following Common Vulnerabilities and Exposures (CVE) identifiers were assigned to track which products are affected by specific instantiations of the key reinstallation attack:CVE-2017-13077, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13084, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088
TP-Link is aware of the vulnerabilities (KRACKs) in the WPA-2 protocol. We have published a security advisory on the official website and are working to solve the problems now.
Security Advisory: http://www.tp-link.com/en/faq-1970.html
[FONT=&]Software updates for the affected devices will be post at http://www.tp-link.com/support.html over the next few weeks.[/FONT]
Your network security is highly regarded by TP-Link.
Clarification for the WPA2 Vulnerabilities:
1. Please have a look at the article published by Mathy Vanhoef and pay attention to the QA listed at the end:
Q: What if there are no security updates for my router?
A: Our main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates. We strongly advise you to contact your vendor for more details. In general though, you can try to mitigate attacks against routers and access points by disabling client functionality (which is for example used in repeater modes) and disabling 802.11r (fast roaming). For ordinary home users, your priority should be updating clients such as laptops and smartphones.
From the QA, we can get clear that the vulnerabilities only targets the devices act as Wi-Fi clients, including laptops, smartphones, range extenders working in RE mode, routers/gateways working in RE/WDS/WISP mode.
Thus if you're using the following TP-Link products:
(Unaffected Devices)
# All powerline adapters
# All mobile Wi-Fi products
# Routers and gateways working on default Router mode or Access Point mode
# Range extenders working in AP mode
You will not be affected by the WPA2 vulnerabilities. What you need to do is updating your Wi-Fi clients.
2. Conditions under which devices are vulnerable:
# Physical proximity: An attack can only happen when an attacker is in physical proximity to and within wireless range of your network.
# Time window: An attack can only happen when a client is connecting or reconnecting to a Wi-Fi network.
Devices affected by the vulnerability
Routers working in Repeater Mode/WISP Mode/Client Mode:
TL-WR940N with firmware version 3.17.1 Build 170717 Rel.55495n or earlier (Hardware Version 3.0 or earlier not affected)
[FONT=verdana]TL-WR841Nv13 with firmware version 0.9.1 4.16 v0348.0 Build 170814 Rel.59214n or earlier (Hardware Version 12.0 or earlier not affected)
TL-WR840N with firmware version 0.9.1 4.16 v019a.0 Build 170524 Rel.56478n or earlier (Hardware Version 2.0 or earlier not affected)
TL-WR941HP with firmware version 3.16.9 Build 20170116 Rel.50912n or earlier
TL-WR841HP with firmware version 3.16.9 Build 160612 Rel.67073n or earlier
TL-WR902AC with firmware version 3.16.9 Build 20160905 Rel.61455n or earlier
TL-WR802N with firmware version 0.9.1 3.16 v0188.0 Build 170705 Rel.34179n or earlier
TL-WR810N with firmware version 3.16.9 Build 160801 Rel.57365n or earlier
Routers with WDS function enabled (disabled by default) may be affected. Refer to the [COLOR=#0000ff]FAQ to learn how to check if WDS is enabled on your router.
Range Extenders working in Repeater Mode during a WPA2 handshake that is initiated only when connecting or reconnecting to a router:
TL-WA850RE with firmware version 1.0.0 Build 20170609 Rel.34153 or earlier
TL-WA855RE with firmware version 1.0.0 Build 20170609 Rel.36187 or earlier
TL-WA860RE with firmware version 1.0.0 Build 20170609 Rel.38491 or earlier
RE200 with firmware version 1.1.3 Build 20170818 Rel.58183 or earlier
RE210 with firmware version 3.14.2 Build 160623 Rel.43391n or earlier
RE305 with firmware version 1.0.0 Build 20170614 Rel.42952 or earlier
RE450 with firmware version 1.0.2 Build 20170626 Rel.60833 or earlier
RE500 with firmware version 1.0.1 Build20170210 Rel.59671 or earlier
RE650 with firmware version 1.0.2 Build 20170524 Rel.58598 or earlier
Wireless Adapters:
Archer T6E
Archer T9E
Whole Home Wi-Fi System:
Deco M5 with firmware version 1.1.5 Build 20170820 Rel.62483 or earlier
CPE/WBS/CAP:
CAP300 with firmware version 1.1.0 Build 20170601 Rel.60253 or earlier
CAP300-Outdoor with firmware version 1.1.0 Build 20170601 Rel.60212 or earlier
CAP1750 with firmware version 1.1.0 Build 20170601 Rel.60196 or earlier
CAP1200 with firmware version 1.0.0 Build 20170801 Rel.61314 or earlier
TL-ER604W with firmware version 1.2.0 Build 20160825 Rel.45880 or earlier
CPE520 with firmware version 2.1.6 Build 20170908 Rel.45234 or earlier
CPE610 with firmware version 2.1.5 Build 20170830 Rel. 58245 or earlier
CPE510 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE220 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE210 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
WBS210 with firmware version 2.1.0 Build 20170609 Rel. 57434 or earlier
WBS510 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
Smart home devices:
Smart Plugs and Switch: HS100,HS105,HS110,HS200
Smart Repeater with Plugs: RE350K,RE270K,RE370K
Cameras: NC250,NC260,NC450, KC120
[/FONT]
How to protect your devices
Until a software update is available to eliminate the vulnerability for your product, it is recommended to take the following precautions:
For wireless routers: Make sure your routers are in Router Mode or AP Mode, and patch the operating system of your smartphones, tablets and computers.
For wireless adapters: Patch the operating system of your computers.
Microsoft security update: Microsoft has fixed such security issues as mentioned in https://portal.msrc.microsoft.com/en-US/security-guidance/advisory/CVE-2017-13080
TP-Link has been working on affected models and will release firmware over the next few weeks on our official website.
Reversion History
2017-10-17: Initial release
2017-10-18: Updated some clarifications for the WPA2 vulnerabilities
2017-10-18: Updated the list of affected devices
On October 16th, 2017, an security researcher has disclosed some severe flaws in the WPA2 security protocol.
Description of the vulnerability
The vulnerability that known as "KRACK", short for Key Reinstallation Attack, will target the four-way handshake of the WPA2 protocol. Mathy Vanhoef, who published the flaw, said that the flaw may allow an attacker within the Wi-Fi range to decrypt network traffic from a WPA2-enabled device, hijack connections, and inject content into the traffic stream.
The publisher also points out that, the main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates.
For more details, please refer to the below article published by Vanhoef:
https://www.krackattacks.com/
The following Common Vulnerabilities and Exposures (CVE) identifiers were assigned to track which products are affected by specific instantiations of the key reinstallation attack:CVE-2017-13077, CVE-2017-13078, CVE-2017-13079, CVE-2017-13080, CVE-2017-13081, CVE-2017-13082, CVE-2017-13084, CVE-2017-13086, CVE-2017-13087, CVE-2017-13088
TP-Link is aware of the vulnerabilities (KRACKs) in the WPA-2 protocol. We have published a security advisory on the official website and are working to solve the problems now.
Security Advisory: http://www.tp-link.com/en/faq-1970.html
[FONT=&]Software updates for the affected devices will be post at http://www.tp-link.com/support.html over the next few weeks.[/FONT]
Your network security is highly regarded by TP-Link.
Clarification for the WPA2 Vulnerabilities:
1. Please have a look at the article published by Mathy Vanhoef and pay attention to the QA listed at the end:
Q: What if there are no security updates for my router?
A: Our main attack is against the 4-way handshake, and does not exploit access points, but instead targets clients. So it might be that your router does not require security updates. We strongly advise you to contact your vendor for more details. In general though, you can try to mitigate attacks against routers and access points by disabling client functionality (which is for example used in repeater modes) and disabling 802.11r (fast roaming). For ordinary home users, your priority should be updating clients such as laptops and smartphones.
From the QA, we can get clear that the vulnerabilities only targets the devices act as Wi-Fi clients, including laptops, smartphones, range extenders working in RE mode, routers/gateways working in RE/WDS/WISP mode.
Thus if you're using the following TP-Link products:
(Unaffected Devices)
# All powerline adapters
# All mobile Wi-Fi products
# Routers and gateways working on default Router mode or Access Point mode
# Range extenders working in AP mode
You will not be affected by the WPA2 vulnerabilities. What you need to do is updating your Wi-Fi clients.
2. Conditions under which devices are vulnerable:
# Physical proximity: An attack can only happen when an attacker is in physical proximity to and within wireless range of your network.
# Time window: An attack can only happen when a client is connecting or reconnecting to a Wi-Fi network.
Devices affected by the vulnerability
Routers working in Repeater Mode/WISP Mode/Client Mode:
TL-WR940N with firmware version 3.17.1 Build 170717 Rel.55495n or earlier (Hardware Version 3.0 or earlier not affected)
[FONT=verdana]TL-WR841Nv13 with firmware version 0.9.1 4.16 v0348.0 Build 170814 Rel.59214n or earlier (Hardware Version 12.0 or earlier not affected)
TL-WR840N with firmware version 0.9.1 4.16 v019a.0 Build 170524 Rel.56478n or earlier (Hardware Version 2.0 or earlier not affected)
TL-WR941HP with firmware version 3.16.9 Build 20170116 Rel.50912n or earlier
TL-WR841HP with firmware version 3.16.9 Build 160612 Rel.67073n or earlier
TL-WR902AC with firmware version 3.16.9 Build 20160905 Rel.61455n or earlier
TL-WR802N with firmware version 0.9.1 3.16 v0188.0 Build 170705 Rel.34179n or earlier
TL-WR810N with firmware version 3.16.9 Build 160801 Rel.57365n or earlier
Routers with WDS function enabled (disabled by default) may be affected. Refer to the [COLOR=#0000ff]FAQ to learn how to check if WDS is enabled on your router.
Range Extenders working in Repeater Mode during a WPA2 handshake that is initiated only when connecting or reconnecting to a router:
TL-WA850RE with firmware version 1.0.0 Build 20170609 Rel.34153 or earlier
TL-WA855RE with firmware version 1.0.0 Build 20170609 Rel.36187 or earlier
TL-WA860RE with firmware version 1.0.0 Build 20170609 Rel.38491 or earlier
RE200 with firmware version 1.1.3 Build 20170818 Rel.58183 or earlier
RE210 with firmware version 3.14.2 Build 160623 Rel.43391n or earlier
RE305 with firmware version 1.0.0 Build 20170614 Rel.42952 or earlier
RE450 with firmware version 1.0.2 Build 20170626 Rel.60833 or earlier
RE500 with firmware version 1.0.1 Build20170210 Rel.59671 or earlier
RE650 with firmware version 1.0.2 Build 20170524 Rel.58598 or earlier
Wireless Adapters:
Archer T6E
Archer T9E
Whole Home Wi-Fi System:
Deco M5 with firmware version 1.1.5 Build 20170820 Rel.62483 or earlier
CPE/WBS/CAP:
CAP300 with firmware version 1.1.0 Build 20170601 Rel.60253 or earlier
CAP300-Outdoor with firmware version 1.1.0 Build 20170601 Rel.60212 or earlier
CAP1750 with firmware version 1.1.0 Build 20170601 Rel.60196 or earlier
CAP1200 with firmware version 1.0.0 Build 20170801 Rel.61314 or earlier
TL-ER604W with firmware version 1.2.0 Build 20160825 Rel.45880 or earlier
CPE520 with firmware version 2.1.6 Build 20170908 Rel.45234 or earlier
CPE610 with firmware version 2.1.5 Build 20170830 Rel. 58245 or earlier
CPE510 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE220 with firmware version 2.1.6 Build 20170908 Rel. 45233 or earlier
CPE210 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
WBS210 with firmware version 2.1.0 Build 20170609 Rel. 57434 or earlier
WBS510 with firmware version 2.1.6 Build 20170908 Rel. 45234 or earlier
Smart home devices:
Smart Plugs and Switch: HS100,HS105,HS110,HS200
Smart Repeater with Plugs: RE350K,RE270K,RE370K
Cameras: NC250,NC260,NC450, KC120
[/FONT]
How to protect your devices
Until a software update is available to eliminate the vulnerability for your product, it is recommended to take the following precautions:
For wireless routers: Make sure your routers are in Router Mode or AP Mode, and patch the operating system of your smartphones, tablets and computers.
For wireless adapters: Patch the operating system of your computers.
Microsoft security update: Microsoft has fixed such security issues as mentioned in https://portal.msrc.microsoft.com/en-US/security-guidance/advisory/CVE-2017-13080
TP-Link has been working on affected models and will release firmware over the next few weeks on our official website.
Reversion History
2017-10-17: Initial release
2017-10-18: Updated some clarifications for the WPA2 vulnerabilities
2017-10-18: Updated the list of affected devices
#1
Options
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Thread Manage
Announcement Manage
149 Reply
Posts: 1
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-18
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 09:39:22
So this is the only official response yet from TP-link? I find it odd that I had to search on Google to find an official response, tucked away on a forum. There's absolutely nothing about this on the front-page, and this is a major security vulnerability. Come on! Considering that you have had
months to prepare for this, the lack of information is inexcusable.
I have a TL-WR1043ND, and one thing is fore sure, if TP-link doesn't patch or give me any information about this, then I will never buy another product from TP-link again, and I will also make sure to go out of my way to advice people against buying anything from this company whenever the topic of routers comes up.
I have a TL-WR1043ND, and one thing is fore sure, if TP-link doesn't patch or give me any information about this, then I will never buy another product from TP-link again, and I will also make sure to go out of my way to advice people against buying anything from this company whenever the topic of routers comes up.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#32
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 6
Helpful: 0
Solutions: 0
Stories: 0
Registered: 2017-10-17
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:15:38
helpful hints to management
1. regardless of this issue, all sites should now be https. ex. this forum and router admin. this is 2017. talk to your security team!
2. you need a much better security incident response plan. do you have a CISO? if so they are not doing great.
3. you had time to address this before it went public. dont make excuses, be honest and communicate better with your customers,
4. people care about security. this will cost you sales.
1. regardless of this issue, all sites should now be https. ex. this forum and router admin. this is 2017. talk to your security team!
2. you need a much better security incident response plan. do you have a CISO? if so they are not doing great.
3. you had time to address this before it went public. dont make excuses, be honest and communicate better with your customers,
4. people care about security. this will cost you sales.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#33
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:25:48
Hi All,
Please pay attention to the latest updates. If you're using a TP-Link router working in the default router mode or access point mode, please don't be worry as it actually won't be affected by the vulnerabilities. However, we will still release updates to fix the vulnerabilities in weeks when the router is working in the WDS bridging mode, which is disabled by default and rarely used in most user cases. As for range extenders that working in the RE mode, we will release fixes as soon as possible. Thanks.
Please pay attention to the latest updates. If you're using a TP-Link router working in the default router mode or access point mode, please don't be worry as it actually won't be affected by the vulnerabilities. However, we will still release updates to fix the vulnerabilities in weeks when the router is working in the WDS bridging mode, which is disabled by default and rarely used in most user cases. As for range extenders that working in the RE mode, we will release fixes as soon as possible. Thanks.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#34
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:27:41
tonbenron wrote
So this is the only official response yet from TP-link? I find it odd that I had to search on Google to find an official response, tucked away on a forum. There's absolutely nothing about this on the front-page, and this is a major security vulnerability. Come on! Considering that you have had months to prepare for this, the lack of information is inexcusable.
I have a TL-WR1043ND, and one thing is fore sure, if TP-link doesn't patch or give me any information about this, then I will never buy another product from TP-link again, and I will also make sure to go out of my way to advice people against buying anything from this company whenever the topic of routers comes up.
Are you using the WDS Bridging feature with TL-WR1043ND? If not, you won't be affected by the vulnerabilities.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#35
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:30:04
ic3b34r wrote
Please fix it with C7v2 and C1200.
Your C7 will not be affected if you use the default router mode or set it up as an access point.
As for C1200, the model doesn't support WDS function, thus it won't be affected.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#36
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:35:50
jgu wrote
TP-Link: you were notified of this vulnerability more than 90 days ago. During that embargo period you should have researched the issue and prepared suitable updates. What the hell have you been doing?
Please pay attention to the participants of the vulnerability meeting. Not all the manufactures are aware of this vulnerability until the author published it on October 16th. The author doesn't make it widely known due to the security consideration.
However, TP-Link have worked with the chipset provider to get fixes for customers. Will keep updating to you about the process.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#37
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:38:36
Radar wrote
WEEKS (!) Come on TP-Link this isn't something you can address over the 'coming weeks' - You have to address it NOW. Even if it's to say that nothing needs doing. Your rivals seem to be releasing patches all over the place.
Would you please also remember that customers running some of your more legacy equipment models may well be affected. It would be nice to see for instance, my Archer D9 receive an update if it is deemed necessary.
Some of us are quite happy with these legacy goods but would definitely be more than happy to look at rival products from other vendors (that have been patched) should the necessity for new equipment arise in the near future.
Please pay attention to the latest updates.
The vulnerabilities target the Wi-Fi clients only. Thus if your Archer D9 works in the default router mode, you won't be affected by the clients. Just update your Wi-Fi clients to avoid the security vulnerabilities such as laptops and smartphones.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#38
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:42:04
mattp_eng wrote
Our business uses EAP245's and it was their initial value that led us to choose them but it's this response that makes us really regret not spending slightly more to go with the Ubiquiti access points. If we had Ubiquiti access points we would have been able to apply the patch yesterday and move on.
As others have noted in some other threads here, most of us smaller business users can't risk our engineering data being vulnerable, so we simply unplugged all of our access points until TP-LINK can get their act together.
I'd personally recommend that any business user seriously consider another OEM for any professional network based on this pathetic response.
The EAP series don't have a wireless WDS bridging function to make it as a Wi-Fi clients. Thus the EAP series will never be affected by the WPA2 vulnerabilities. So don't be worry about your network security provided by EAP245. What you need to do is updating your Wi-Fi clients.
Ubiquiti patches their products because their access points are associated wirelessly.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#39
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:45:10
bimbam2103 wrote
Hello everybody.
I can confirm that the TP-Link Archer C2 (V 1.0) has this Problem. I tested it minutes ago.
My Problem is, that i use this Router for my server. Deactivating WLAN is not possible because i have also WLAN-Clients like Tablets they do not have a sim-slot.
Is it possible to close this security risk very fast and publish a firmware update because my entire company works with this server included the websites.
Greetings
bimbam2103
If you're using Archer C2 as a wireless router, then it's not the point of the router, but your Wi-Fi clients. Even if the router has updated the latest WPA2 protocol which fixes the vulnerability, your client will still be attacked since it's using the older protocol with vulnerability. Thus just update your clients.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#40
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Re:[Security Flaws] Severe flaws called "KRACK" are discovered in the WPA2 protocol
2017-10-18 10:46:06
gladtobegrey wrote
I hope that will apply to end-of-life products as well, such as my TD-W9980 (Ver 1.0).
If you use the TD-W9980 as a DSL modem router, then you will not be affected by the vulnerabilities. What you need to do is updating your clients.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
0
We appreciate your feedback. Feel free to let us know more. Log in to submit feedback.
#41
Options
- Copy Link
- Report Inappropriate Content
Thread Manage
Announcement Manage
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
2017-10-17 11:29:42
Posts: 334
Helpful: 16
Solutions: 0
Stories: 0
Registered: 2012-03-28
Information
Helpful: 0
Views: 25705
Replies: 154
Voters 0
No one has voted for it yet.
Tags
Related Articles
Archer D(
509
0
'Krack' patches?
418
0
Severe packet loss
46
0
Deco red “D”
269
0
Security
943
0
Report Inappropriate Content
Transfer Module
New message