Archer MR200: Firmware Upgrade error: 4503 The uploaded file was not accepted
Hardware Version :
Firmware Version :
ISP :
Hi all,
I'm trying to upgrade the firmware on an Archer MR200 V1.0, and even though I have downloaded the files for V1 from TP-Link website, it is not possible to upgrade the firmware via Ethernet cable. All the available files are rejected with the same error message. Can it be that the upgrade function is disabled? Though the router is not branded in any way. Could it be that the firmware ipgrade function is disabled somehow? What other reason could there be that the files are generally rejected?
Current Firmware versión: 0.9.1 0.0 v004a.0 Build 160204 Rel.50207n
Versión de Hardware:Archer MR200 v1 00000000
Many thanks.
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
Good day.
I will reply in English and hope you do not mind.
Did you mean the router is hot sometimes?
What is your current firmware version and can I have a picture of the bottom label on the router?
By the way, what is the firmware that you are trying to update? And where are you located?
And have you tried the firmware from the local website:
https://www.tp-link.com/support/download/archer-mr200/#Firmware
Thank you!
- Copy Link
- Report Inappropriate Content
https://www.tp-link.com/es/download/Archer-MR200_V1.html#Firmware
There are three versions on that site.
Or you may try to update one by one from the older. Do not update the latest one directly.
- Copy Link
- Report Inappropriate Content
I have bought the device second hand here in Spain, but it doesn't seem to be branded in any way, but you should be able to see that from the current versión, I guess.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
Good day.
I will reply in English and hope you do not mind.
Did you mean the router is hot sometimes?
What is your current firmware version and can I have a picture of the bottom label on the router?
By the way, what is the firmware that you are trying to update? And where are you located?
And have you tried the firmware from the local website:
https://www.tp-link.com/support/download/archer-mr200/#Firmware
Thank you!
- Copy Link
- Report Inappropriate Content
Ese router es un flybox, vendido por amena y creo que también orange, no se puede actualizar con el firmware de tplink solo con el firmware de amena, esta capado por ellos.
Yo estuve a punto de comprar uno pero me enteré a tiempo de ése problema y busqué uno oroginal de tplink.
En su día busqué mucho y no hay solución, no se le puede engañar para meterle el firmware de tplink.
Lo siento pero es lo que hay..
Un saludo.
- Copy Link
- Report Inappropriate Content
it did not work for me.
i have v4 and on my local website shows v1 firmware.
i have the same issue and my router does no have (eu/bg/cn/ect..) just v4
Archer MR200 v4 00000001
1.0.0 0.9.1 v0001.0 Build 190603 Rel.60023n
this are my router details.
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 6682
Replies: 7
Voters 0
No one has voted for it yet.