Archer C1200 Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.

Archer C1200 Problem

This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Archer C1200 Problem
Archer C1200 Problem
2018-04-23 10:26:43
Model : Archer C1200

Hardware Version : Not Clear

Firmware Version : 1.0.0 Build 20180208 rel.57928 (EU)

ISP : Unifi

TP-LINK Archer C1200


Device Information
Firmware Version: 1.0.0 Build 20180208 rel.57928 (EU)
Hardware Version: Archer C1200 v1.0


Problem:-
(** Problem 2 to 4 need to restart router before get in the function / web)


1. DDNS - failed to update ddns for both service NO-IP & DynDNS (temporary solution: change PPPoE to Dynamic IP and reverse back PPPoE to sign in the ddns)


2. Router management interface sometime show nothing, empty page. (tested connect with local or outsite internet also failed)


3. DHCP Server, sometime auto assign IP failed, wifi or wire cable connect same problem. need to preset static ip in pc before connect. same with connect with wifi from mobile device, some time assign ip failed. 5G wifi more serious.


4. USB Settings -> Sharing Access with FTP: sometime unable to login. (tested with account setting Default Account & New Account)
FTP Access Error, unable to connectUSB Settings -> Sharing Access
show error
Response: 530 Login incorrect.
Error: Critical error: Could not connect to server
need to reset id&pw every time than can login, see log file below,
mean need to restart the ftp service














































1 2018-04-24 11:35:11 USB share NOTICE [3199] MiniDLNA start
2 2018-04-24 11:35:11 USB share NOTICE [3199] ProFTPd start
3 2018-04-24 11:35:11 USB share NOTICE [3199] Samba start
4 2018-04-24 11:35:11 USB share NOTICE [3199] MiniDLNA stop
5 2018-04-24 11:35:10 USB share NOTICE [3199] ProFTPd stop
6 2018-04-24 11:35:09 USB share NOTICE [3199] Samba stop



5. LED Control, didn't turn ON after the schedule
Night mode: Enable Night Mode
Night Mode Period: 23:35 to 06:35(HH:MM)


6. error for type Led Controller, what happen for this error ?
115 2018-02-08 00:00:29 Led Controller ERROR [727] Config importing failed
131 2018-02-08 00:00:14 Led Controller ERROR [727] Config importing failed
239 2018-04-22 22:05:08 Led Controller ERROR [727] Config importing failed
240 2018-04-22 20:11:50 Led Controller ERROR [727] Config importing failed
241 2018-04-22 14:36:48 Led Controller ERROR [727] Config importing failed
242 2018-04-21 13:39:20 Led Controller ERROR [727] Config importing failed
243 2018-04-21 13:27:00 Led Controller ERROR [727] Config importing failed
244 2018-04-21 13:26:51 Led Controller ERROR [727] Config importing failed
245 2018-04-21 13:13:07 Led Controller ERROR [727] Config importing failed
246 2018-04-21 11:25:29 Led Controller ERROR [727] Config importing failed
247 2018-04-21 11:25:11 Led Controller ERROR [727] Config importing failed
248 2018-02-08 00:00:31 Led Controller ERROR [727] Config importing failed
249 2018-02-08 00:00:15 Led Controller ERROR [727] Config importing failed
250 2018-04-21 07:47:30 Led Controller ERROR [719] Config importing failed


  0      
  0      
#1
Options
2 Reply
Re:Archer C1200 Problem
2018-04-23 17:55:35
no matter which web browser, the management interface will meet the same issue?
Is the time setting correct?
If the DHCP server can't assign ip address normally, it may lead issue 1 and 4.
Is your main modem working properly when the router can't assign ip for your clients?
Try to reset the router since the FW is almost the latest one.
  0  
  0  
#2
Options
Re:Archer C1200 Problem
2018-04-24 10:09:07

Kevin SG wrote

no matter which web browser, the management interface will meet the same issue?
Is the time setting correct?
If the DHCP server can't assign ip address normally, it may lead issue 1 and 4.
Is your main modem working properly when the router can't assign ip for your clients?
Try to reset the router since the FW is almost the latest one.


yes, tried all web browser, same issue
when the issue come, other connected device work fine.
since the router got the ntp error, i has change it to another ntp server. so the time issue settled.
reset the router also tried, same also...
  0  
  0  
#3
Options

Information

Helpful: 0

Views: 1454

Replies: 2

Related Articles