Model :

Hardware Version :

Firmware Version :

ISP :

Hi Guys,

Im hoping someone can help me here as I'm struggling a bit.

I have a Model No. TD-W8968 running Version 4 of the firmware and its set up to run as wireless router mode.

It's connected via Fibre to my ISP and I can get to the internet fine using my Laptop.

All other devices (ipad / iphone / raspberry pi) can connect to the devices Wifi without any problems but I cant get to the internet with them.

I've reset the modem multiple times to see if that corrects the issue which it hasnt.
I've updated the firmware to the above mentioned firmware which hasnt corrected the issue.
I've changed the SSID to see if that corrects the issue which it hasnt.
I've changed the bandwidth frequency from 20/40hz to 20Hz which also hasnt corrected the issue.
I also switched off ipv6.

I'm a bit stumped..I'm not sure what else to try.

Version Info
[TABLE="width: 1044"] [TR]	Firmware Version:	1.0.5 Build 150504 Rel.57027
Hardware Version:	TD-W8968 V4 0x00000001
System Running Time:	0Day(s) 00:19:05

[/TR]
[/TABLE]

LAN Info
[TABLE="width: 1044"] [TR]	IPv4	LAN IP Address:	192.168.1.1
LAN MAC Address:	a4:2b:b0:c3:4e:b6

[/TR]











[TR]

IPv6	IPV6 Address/Prefix Length:	NULL
Auto Configuration:	NULL

[/TR]
[/TABLE]

Internet Info
[TABLE="width: 1046"] [TR] [TD][TABLE="width: 1038"] [TR]	IPv4	Status:	UP
WAN Type:	ETH WAN
Layer2 Interface:	eth3
Connection Type:	PPPoE
MAC Address:	a4:2b:b0:c3:4e:b8
WAN IP Address:
Subnet Mask:	255.255.255.255
Default Gateway:
DNS Server (Primary, Secondary):	,
Internet Up Time:	0Day(s) 00:19:46
Shortcut:	Click here to view all WAN interface's status and troubleshooting information.

[/TR]
[/TABLE]
[/TD]
[/TR]
[/TABLE]

Does anyone have any ideas on how to resolve this?

Thanks in advance!
K