Powerline management utility
This thread has been locked for further replies. You can start a new thread to share your ideas or ask questions.
Powerline management utility
Region : UnitedKingdom
Model : TL-WPA281KIT
Hardware Version : V1
Firmware Version :
ISP :
No matter what I try the web based management utility will not start up. I get the error message below. This means that I can use the wifi and wired system but cannot set upthe security or other settings. Can anyone help?
401 N/A Server: Router Connection: close WWW-Authenticate: Basic realm="300Mbps AV200 Wireless N Powerline Extender" Content-Type: text/html
Username or Password is incorrect.
Please refer to the troubleshooting below:
Is the "Caps Lock" enabled on your keyboard?
The username and password must be lowercase, please ensure that the "Caps Lock" LED is disabled on your keyboard and try again.
Forgot your username or password?
Please reset the device to the factory default settings if you have forgotten your username or password. The default username and password are both set as "admin".
Note: The settings will be restored to factory default after the resetting.
How to restore the device to the factory default settings?
Firstly locate the reset button on the rear panel of the unit, whilst the device is powered on press and hold the reset button for more than 5 seconds, the device will then reboot and restore itself to the factory default settings.
Model : TL-WPA281KIT
Hardware Version : V1
Firmware Version :
ISP :
No matter what I try the web based management utility will not start up. I get the error message below. This means that I can use the wifi and wired system but cannot set upthe security or other settings. Can anyone help?
401 N/A Server: Router Connection: close WWW-Authenticate: Basic realm="300Mbps AV200 Wireless N Powerline Extender" Content-Type: text/html
Username or Password is incorrect.
Please refer to the troubleshooting below:
Is the "Caps Lock" enabled on your keyboard?
The username and password must be lowercase, please ensure that the "Caps Lock" LED is disabled on your keyboard and try again.
Forgot your username or password?
Please reset the device to the factory default settings if you have forgotten your username or password. The default username and password are both set as "admin".
Note: The settings will be restored to factory default after the resetting.
How to restore the device to the factory default settings?
Firstly locate the reset button on the rear panel of the unit, whilst the device is powered on press and hold the reset button for more than 5 seconds, the device will then reboot and restore itself to the factory default settings.
