Unable to access Archer C8 remotely
Unable to access Archer C8 remotely
Good day,
- I enabled remote control in Advanced -> Tools -> Admin.
- I enabled "allow all devices to access"
- I selected port 8080
- I went to www.canyouseeme.org and made sure port 8080 is accessible.
I then set up DDNS with No-IP, entered all the details into the DDNS part of Archer C8 interface and was able to log in.
I am not able to reach the router from an external network. I tried both http://no-ipServerName:8080 and https://no-ipServerName:8080 - with no luck. I can only access the router from within the home wifi, but that is not what I am looking for.
I also went to the ISP-provided modem and tried adding NAT/port forwarding - still no luck.
Help will be greatly appreciated.
Thank you!
- Copy Link
- Subscribe
- Bookmark
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
ArcherC8 wrote
see https://www.tp-link.com/us/faq-1366.html
This does not work for me at all - I am able to log in, but all I see is "no cameras on this account", even though I created the cloud account by clicking the link within the router interface.
- Copy Link
- Report Inappropriate Content
ArcherC8 wrote
Another thought.. Can you sign on to the router remotely using your IP address plus the port number ( something like 55.55.55.555:8080)?
Yes, I can. But when I try to use no-IP (both http and https), no luck. Even though no-IP shows my current IP address and confirms it has been updated recently.
- Copy Link
- Report Inappropriate Content
Resolved.
I changed the DDNS setting to "TP LINK", then tried logging in by navigating to http://domainname.tplinkdns.com:portNumber and it worked. The only problem: unless I use incognito mode, I can log in, but I get logged out after approx. 1 second. I can live with that.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
ArcherC8 wrote
Glad you got it worked out.
I cheered prematurely. The above-mentioned solution worked for a few weeks, now - although I did not change any settings - I can no longer access the router remotely.
Any suggestions? @archerc8
- Copy Link
- Report Inappropriate Content
Any suggestions anyone? No idea why the remote access via domainName.tplinkdns.com stopped working although no settings have been changed on the router or on the home network.
- Copy Link
- Report Inappropriate Content
- Copy Link
- Report Inappropriate Content
ArcherC8 wrote
Check to see if your ISP address was changed by your ISP.
Does not seem so.
Here is something interesting: with no changes made, the remote access works again. It is great, of course, I just wonder what blocked that access that made it impossible for me to access remotely...
- Copy Link
- Report Inappropriate Content
Information
Helpful: 0
Views: 2853
Replies: 13
Voters 0
No one has voted for it yet.